U Apple iOS-iPadOS 16 BYOAD V1R1

ℹ️ The items you can view are limited because you do not have a subscription. Contact us at [email protected] to purchase one.

UNCLASSIFIED
Group Title
PP-MDF-331090
Group ID
V-257104
Rule Version
AIOS-16-701000
Rule Title
Apple iOS/iPadOS 16 must allow the administrator (MDM) to perform the following management function: enable/disable VPN protection across the device.
Rule ID
SV-257104r904212_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

The system administrator must configure VPN access to meet organization-specific policies based on mission needs. Otherwise, a user could inadvertently or maliciously set up a VPN and connect to a network that poses unacceptable risk to DOD information systems. An adversary could exploit vulnerabilities created by the weaker configuration to compromise DOD sensitive information.

SFR ID: FMT_SMF_EXT.1.1 #3

Documentable
False
Check Content

Review the list of unmanaged apps installed on the iPhone and iPad and determine if any third-party VPN clients are installed. If so, verify the VPN app is not configured with a DOD network (work/managed) VPN profile.

This validation procedure is performed on the iOS device only.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap the "VPN and Device Management" line and determine if any "Personal VPN" exists.

4. If not, the requirement has been met.

5. If there are personal VPNs, open each VPN app. Review the list of VPN profiles configured on the VPN client.

6. Verify no DOD network VPN profiles are configured on the VPN client.

If any third-party unmanaged VPN apps are installed (personal VPN), and they have a DOD network VPN profile configured on the client, this is a finding.

Note: This setting cannot be managed by the MDM administrator and is a User-Based Enforcement (UBE) requirement.

Check System
C-60789r904210_chk
Fix Reference
F-60730r904211_fix
Fix Text

If a third-party unmanaged VPN app is installed on the iOS 16 device, do not configure the VPN app with a DOD network VPN profile.

Identities
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
CCI-000370

Manage configuration settings for organization-defined system components using organization-defined automated mechanisms.

  • 800-53 :: CM-6 (1)
  • 800-53 Rev. 4 :: CM-6 (1)
  • 800-53 Rev. 5 :: CM-6 (1)
  • 800-53A :: CM-6 (1).1
Group Title
PP-MDF-331290
Group ID
V-257105
Rule Version
AIOS-16-703600
Rule Title
Apple iOS/iPadOS 16 must not allow backup to remote systems (managed applications data stored in iCloud).
Rule ID
SV-257105r904215_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

If a user is able to configure the security setting, the user could inadvertently or maliciously set it to a value that poses unacceptable risk to DOD information systems. An adversary could exploit vulnerabilities created by the weaker configuration to compromise DOD sensitive information.

SFR ID: FMT_MOF_EXT.1.2 #40

Documentable
False
Check Content

Review configuration settings to confirm "Allow managed apps to store data in iCloud" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Allow managed apps to store data in iCloud" is unchecked.

Alternatively, verify the text "<key>allowManagedAppsCloudSync</key> <false/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN &Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Managed apps cloud sync not allowed" is listed.

If "Allow managed apps to store data in iCloud" is checked in the Apple iOS/iPadOS management tool, "<key>allowManagedAppsCloudSync</key> <true/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "Managed apps cloud sync not allowed", this is a finding.

Check System
C-60790r904213_chk
Fix Reference
F-60731r904214_fix
Fix Text

Install a configuration profile to prevent DOD applications from storing data in iCloud.

Identities
CCI-000097

Restrict the use of organization-controlled portable storage devices by authorized individuals on external systems using organization-defined restrictions.

  • 800-53 :: AC-20 (2)
  • 800-53 Rev. 4 :: AC-20 (2)
  • 800-53 Rev. 5 :: AC-20 (2)
  • 800-53A :: AC-20 (2).1
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
CCI-000370

Manage configuration settings for organization-defined system components using organization-defined automated mechanisms.

  • 800-53 :: CM-6 (1)
  • 800-53 Rev. 4 :: CM-6 (1)
  • 800-53 Rev. 5 :: CM-6 (1)
  • 800-53A :: CM-6 (1).1
Group Title
PP-MDF-331290
Group ID
V-257106
Rule Version
AIOS-16-703700
Rule Title
Apple iOS/iPadOS 16 must not allow backup to remote systems (enterprise books).
Rule ID
SV-257106r904218_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

If a user is able to configure the security setting, the user could inadvertently or maliciously set it to a value that poses unacceptable risk to DOD information systems. An adversary could exploit vulnerabilities created by the weaker configuration to compromise DOD sensitive information.

SFR ID: FMT_MOF_EXT.1.2 #40

Documentable
False
Check Content

Review configuration settings to confirm "Allow backup of enterprise books" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Allow backup of enterprise books" is unchecked.

Alternatively, verify the text "<key>allowEnterpriseBookBackup</key> <false/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Backing up enterprise books not allowed" is listed.

If "Allow backup of enterprise books" is checked in the Apple iOS/iPadOS management tool, "<key>allowEnterpriseBookBackup</key> <true/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "Backing up enterprise books not allowed", this is a finding.

Check System
C-60791r904216_chk
Fix Reference
F-60732r904217_fix
Fix Text

Install a configuration profile to prevent backup of enterprise books that could contain DOD sensitive information.

Identities
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
CCI-002110

The organization defines the information system account types that support the organizational missions/business functions.

  • 800-53 Rev. 4 :: AC-2 a
Group Title
PP-MDF-333024
Group ID
V-257107
Rule Version
AIOS-16-706500
Rule Title
Apple iOS/iPadOS 16 must be configured to enforce a minimum password length of six characters.
Rule ID
SV-257107r904221_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

Password strength is a measure of the effectiveness of a password in resisting guessing and brute force attacks. The ability to crack a password is a function of how many attempts an adversary is permitted, how quickly an adversary can do each attempt, and the size of the password space. The longer the minimum length of the password is, the larger the password space. Having a too-short minimum password length significantly reduces password strength, increasing the chance of password compromise and resulting device and data compromise.

SFR ID: FMT_SMF_EXT.1.1 #1a

Documentable
False
Check Content

Review configuration settings to confirm the minimum passcode length is six or more characters.

This procedure is performed in the Apple iOS/iPadOS management tool and on the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Management tool, for User Enrollment, verify a Passcode profile has been sent to managed mobile devices. For Device Enrollment, verify the Passcode profile has "Minimum passcode length" value set to six or greater.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the password policy.

5. Tap "Restrictions".

6a. For User Enrollment, verify a Passcode profile is present.

6b. For Device Enrollment, Tap "Passcode". Verify "Minimum length" is listed as "six or greater".

For User Enrollment, if a Password profile is not installed, this is a finding.

For Device Enrollment, if the "Minimum passcode length" is less than six characters in the iOS management tool or the password policy on the iPhone and iPad from the Apple iOS/iPadOS management tool does not list "Minimum length" of six or greater, this is a finding.

Check System
C-60792r904219_chk
Fix Reference
F-60733r904220_fix
Fix Text

Install a configuration profile to enforce a minimum passcode length value of six or greater.

For User Enrollment, when a Passcode profile is installed on the mobile device, the password length is automatically set to six characters.

For Device enrollment, the password length must be set to six characters in the Passcode profile.

Identities
CCI-000205

The information system enforces minimum password length.

  • 800-53 :: IA-5 (1) (a)
  • 800-53 Rev. 4 :: IA-5 (1) (a)
  • 800-53A :: IA-5 (1).1 (i)
Group Title
PP-MDF-333025
Group ID
V-257108
Rule Version
AIOS-16-706600
Rule Title
Apple iOS/iPadOS 16 must be configured to not allow passwords that include more than four repeating or sequential characters.
Rule ID
SV-257108r904224_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

Password strength is a measure of the effectiveness of a password in resisting guessing and brute force attacks. Passwords that contain repeating or sequential characters are significantly easier to guess than those that do not contain repeating or sequential characters. Therefore, disallowing repeating or sequential characters increases password strength and decreases risk.

SFR ID: FMT_SMF_EXT.1.1 #1b

Documentable
False
Check Content

Review configuration settings to confirm simple passcodes are not allowed.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool:

- For User Enrollment, verify a Password profile has been installed on Managed mobile devices.

- For Device Enrollment, verify "Allow simple value" is unchecked in the Passcode profile.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the password policy.

5. Tap "Restrictions".

6a. For User Enrollment, verify a Passcode profile is present.

6b. For Device Enrollment, Tap "Passcode". Verify "Simple passcodes allowed" is set to "No".

For User Enrollment, if a Password profile is not installed, this is a finding.

For Device Enrollment, if "Allow simple value" is checked in the Apple iOS/iPadOS management tool or the password policy on the iPhone and iPad does not have "Simple passcodes allowed" set to "No", this is a finding.

Check System
C-60793r904222_chk
Fix Reference
F-60734r904223_fix
Fix Text

Install a configuration profile to disallow more than four sequential or repeating numbers or letters in the device unlock password.

Note: For User Enrollment, this requirement is met automatically if a Password profile is installed.

Identities
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
Group Title
PP-MDF-333026
Group ID
V-257109
Rule Version
AIOS-16-706700
Rule Title
Apple iOS/iPadOS 16 must be configured to enable a screen-lock policy that will lock the display after a period of inactivity.
Rule ID
SV-257109r904227_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

The screen-lock timeout helps protect the device from unauthorized access. Devices without a screen-lock timeout provide an opportunity for adversaries who gain physical access to the mobile device through loss, theft, etc. Such devices are much more likely to be in an unlocked state when acquired by an adversary, thus granting immediate access to the data on the mobile device and possibly access to DOD networks.

SFR ID: FMT_SMF_EXT.1.1 #2a

Documentable
False
Check Content

Review configuration settings to confirm the screen lock timeout is set to 15 minutes or less.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

For User Enrollment, check a sample of user phones to verify compliance:

1. Open "Settings".

2. Tap "Display & Brightness".

3. Tap "Auto-Lock".

4. Verify "Auto-Lock" has been set to "5 minutes" or less. 

For Device Enrollment, in the management tool, verify the sum of the values assigned to "Maximum Auto-Lock time" and "Grace period for device lock" is between 1 and 15 minutes.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the password policy.

5. Tap "Restrictions".

6. Tap "Passcode".

7. Verify the sum of the "Max grace period" and "Max inactivity" values is less than 15 minutes.

Note: On some iOS/iPadOS devices, it is not possible to have a sum of exactly 15. In these cases, the sum must be less than 15. A sum of 16 does not meet the requirement.

For User Enrollment, if on sampled Apple devices the Auto-Lock is not set to 5 minutes or less, this is a finding.

For Device Enrollment, on the management server, if the sum of the "Max grace period" and "Max inactivity" values is not between 1 and 15 minutes in the iOS/iPadOS management tool or if on the iPhone/iPad, the sum of the values assigned to "Max grace period" and "Max inactivity" is not between 1 and 15 minutes, this is a finding.

Check System
C-60794r904225_chk
Fix Reference
F-60735r904226_fix
Fix Text

For User Enrollment, this is a User-Based Enforcement (UBE) control. The device user must configure setting on their personal phone.

1. Open "Settings".

2. Tap "Display & Brightness".

3. Tap "Auto-Lock".

4. Set "Auto-Lock" to "5 minutes" or less.

For Device Enrollment, install a configuration profile to lock the device display after 15 minutes (or less) of inactivity. This is done by setting "Maximum Auto-Lock time" and "Grace Period for device lock" so the sum of their values is between 1 and 15 minutes.

Identities
CCI-000057

The information system initiates a session lock after the organization-defined time period of inactivity.

  • 800-53 :: AC-11 a
  • 800-53 Rev. 4 :: AC-11 a
  • 800-53 Rev. 5 :: AC-11 a
  • 800-53A :: AC-11.1 (ii)
Group Title
PP-MDF-333030
Group ID
V-257110
Rule Version
AIOS-16-706800
Rule Title
Apple iOS/iPadOS 16 must be configured to lock the display after 15 minutes (or less) of inactivity.
Rule ID
SV-257110r904230_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

The screen lock timeout must be set to a value that helps protect the device from unauthorized access. Having a too-long timeout would increase the window of opportunity for adversaries who gain physical access to the mobile device through loss, theft, etc. Such devices are much more likely to be in an unlocked state when acquired by an adversary, thus granting immediate access to the data on the mobile device. The maximum timeout period of 15 minutes has been selected to balance functionality and security; shorter timeout periods may be appropriate depending on the risks posed to the mobile device.

SFR ID: FMT_SMF_EXT.1.1 #2b

Documentable
False
Check Content

Review configuration settings to confirm the screen lock timeout is set to 15 minutes or less.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

For User Enrollment, check a sample of user phones to verify compliance:

1. Open "Settings".

2. Tap "Display & Brightness".

3. Tap "Auto-Lock".

4. Verify "Auto-Lock" has been set to "5 minutes" or less.

For Device Enrollment, in the management tool, verify the sum of the values assigned to "Maximum Auto-Lock time" and "Grace period for device lock" is between 1 and 15 minutes.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the password policy.

5. Tap "Restrictions".

6. Tap "Passcode".

7. Verify the sum of the "Max grace period" and "Max inactivity" values is less than 15 minutes.

Note: On some iOS/iPadOS devices, it is not possible to have a sum of exactly 15. In these cases, the sum must be less than 15. A sum of 16 does not meet the requirement.

For User Enrollment, if on sampled Apple devices the Auto-Lock is not set to 5 minutes or less, this is a finding.

For Device Enrollment, on the management server, if the sum of the "Max grace period" and "Max inactivity" values is not between 1 and 15 minutes in the iOS/iPadOS management tool or if on the iPhone/iPad, the sum of the values assigned to "Max grace period" and "Max inactivity" is not between 1 and 15 minutes, this is a finding.

Check System
C-60795r904228_chk
Fix Reference
F-60736r904229_fix
Fix Text

For User Enrollment, this is a User-Based Enforcement (UBE) control. The device user must configure setting on their personal phone.

1. Open "Settings".

2. Tap "Display & Brightness".

3. Tap "Auto-Lock".

4. Set "Auto-Lock" to "5 minutes" or less.

For Device Enrollment, install a configuration profile to lock the device display after 15 minutes (or less) of inactivity. This is done by setting "Maximum Auto-Lock time" and "Grace Period for device lock" so the sum of their values is between 1 and 15 minutes.

Identities
CCI-000057

The information system initiates a session lock after the organization-defined time period of inactivity.

  • 800-53 :: AC-11 a
  • 800-53 Rev. 4 :: AC-11 a
  • 800-53 Rev. 5 :: AC-11 a
  • 800-53A :: AC-11.1 (ii)
Group Title
PP-MDF-333040
Group ID
V-257111
Rule Version
AIOS-16-706900
Rule Title
Apple iOS/iPadOS 16 must be configured to not allow more than 10 consecutive failed authentication attempts.
Rule ID
SV-257111r904233_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

The more attempts an adversary has to guess a password, the more likely the adversary will enter the correct password and gain access to resources on the device. Setting a limit on the number of attempts mitigates this risk. Setting the limit at 10 or less gives authorized users the ability to make a few mistakes when entering the password but still provides adequate protection against dictionary or brute force attacks on the password.

SFR ID: FMT_SMF_EXT.1.1 #2c, FIA_AFL_EXT.1.5

Documentable
False
Check Content

Review configuration settings to confirm consecutive failed authentication attempts is set to 10 or fewer.

This procedure is performed in the Apple iOS/iPadOS management tool and on the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

For User Enrollment, check a sample of user phones to verify compliance:

1. Open the Settings app.

2. Tap "Face ID & Passcode".

3. When prompted, enter Passcode.

4. Scroll down and verify "Erase Data" is turned on.

Note: The number of failed attempts is automatically set to "10".

For Device Enrollment:

In the Management tool, verify the "Maximum number of failed attempts" value is set to "10" or fewer.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the password policy.

5. Tap "Restrictions".

6. Tap "Passcode".

7. Verify "Max failed attempts" is listed as "10" or fewer.

For User Enrollment, if "Erase Data" is not turned on for sample devices, this is a finding.

For Device Enrollment, if the "Maximum number of failed attempts" is more than "10" in the iOS management tool or the password policy on the iPhone and iPad does not list "Max failed attempts" of "10" or fewer, this is a finding.

Check System
C-60796r904231_chk
Fix Reference
F-60737r904232_fix
Fix Text

For User Enrollment, this is a User-Based Enforcement (UBE) control. The device user must configure setting on their personal phone.

1. Open the Settings app.

2. Tap "Face ID & Passcode".

3. When prompted, enter Passcode.

4. Scroll down and turn on "Erase Data".

Note: The number of failed attempts is automatically set to "10".

For Device Enrollment, install a configuration profile to allow only "10" or fewer consecutive failed authentication attempts.

Identities
CCI-000044

Enforce the organization-defined limit of consecutive invalid logon attempts by a user during the organization-defined time period.

  • 800-53 :: AC-7 a
  • 800-53 Rev. 4 :: AC-7 a
  • 800-53 Rev. 5 :: AC-7 a
  • 800-53A :: AC-7.1 (ii)
Group Title
PP-MDF-333050
Group ID
V-257112
Rule Version
AIOS-16-707000
Rule Title
Apple iOS/iPadOS 16 must be configured to enforce an application installation policy by specifying one or more authorized application repositories, including [selection: DOD-approved commercial app repository, MDM server, mobile application store].
Rule ID
SV-257112r904236_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

Forcing all applications to be installed from authorized application repositories can prevent unauthorized and malicious applications from being installed and executed on mobile devices. Allowing such installations and executions could cause a compromise of DOD data accessible by these unauthorized/malicious applications.

SFR ID: FMT_SMF_EXT.1.1 #8a

Documentable
False
Check Content

Review configuration settings to confirm "Allow Trusting New Enterprise App Authors" is disabled.

This procedure is performed in the Apple iOS/iPadOS management tool and on the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Management tool, verify "Allow Trusting New Enterprise App Authors" is disabled.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Trusting enterprise apps not allowed" is listed.

If "Allow Trusting New Enterprise App Authors" is not disabled in the iOS/iPadOS management tool or on the iPhone and iPad, this is a finding.

Check System
C-60797r904234_chk
Fix Reference
F-60738r904235_fix
Fix Text

Install a configuration profile to disable "Allow Trusting New Enterprise App Authors".

Identities
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
Group Title
PP-MDF-333070
Group ID
V-257113
Rule Version
AIOS-16-707400
Rule Title
The Apple iOS/iPadOS 16 allow list must be configured to not include applications with the following characteristics: - backs up MD data to non-DOD cloud servers (including user and application access to cloud backup services); - transmits MD diagnostic data to non-DOD servers; - allows synchronization of data or applications between devices associated with user; and - allows unencrypted (or encrypted but not FIPS 140-2/FIPS 140-3 validated) data sharing with other MDs or printers.
Rule ID
SV-257113r904239_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

Requiring all authorized applications to be in an application allow list prevents the execution of any applications (e.g., unauthorized, malicious) that are not part of the allow list. Failure to configure an application allow list properly could allow unauthorized and malicious applications to be downloaded, installed, and executed on the mobile device, causing a compromise of DOD data accessible by these applications. Applications with the listed characteristics have features that can cause the compromise of sensitive DOD data or have features with no known application in the DOD environment.

Application note: The application allow list, in addition to controlling the installation of applications on the MD, must control user access/execution of all core and preinstalled applications, or the MD must provide an alternate method of restricting user access/execution to core and preinstalled applications.

Core application: Any application integrated into the OS by the OS or MD vendors.

Preinstalled application: Additional noncore applications included in the OS build by the OS vendor, MD vendor, or wireless carrier.

SFR ID: FMT_SMF_EXT.1.1 #8b

Documentable
False
Check Content

Verify no apps with the following prohibited characteristics are included in the configuration profile:

- backs up MD data to non-DOD cloud servers (including user and application access to cloud backup services);

- transmits MD diagnostic data to non-DOD servers;

- allows synchronization of data or applications between devices associated with user; and

- allows unencrypted (or encrypted but not FIPS 140-2/FIPS 140-3 validated) data sharing with other MDs or printers.

This check procedure is performed on the Apple iOS/iPadOS management tool.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Allow Listed App" (allowlistedAppBundleIDs) is configured and there are no managed apps with prohibited characteristics.

If "Allow listed apps" is not configured and contains apps with prohibited characteristics, this is a finding.

Check System
C-60798r904237_chk
Fix Reference
F-60739r904238_fix
Fix Text

Install a configuration profile with an allow list of approved apps (allowlistedAppBundleIDs). Ensure the allow list does not include apps with the following characteristics:

- Backs up MD data to non-DOD cloud servers (including user and application access to cloud backup services).

- Transmits MD diagnostic data to non-DOD servers.

- Allows synchronization of data or applications between devices associated with user.

- Allows unencrypted (or encrypted but not FIPS 140-2/FIPS 140-3 validated) data sharing with other MDs or printers.

Identities
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
Group Title
PP-MDF-333080
Group ID
V-257114
Rule Version
AIOS-16-707500
Rule Title
Apple iOS/iPadOS 16 must be configured to not display notifications when the device is locked.
Rule ID
SV-257114r904242_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

Many mobile devices display notifications on the lock screen so users can obtain relevant information in a timely manner without having to frequently unlock the phone to determine if there are new notifications. However, in many cases, these notifications can contain sensitive information. When they are available on the lock screen, an adversary can see them merely by being in close physical proximity to the device. Configuring the MOS to not send notifications to the lock screen mitigates this risk.

SFR ID: FMT_SMF_EXT.1.1 #18

Documentable
False
Check Content

Review configuration settings to confirm "Show Notification Center in Lock screen" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Show Notification Center in Lock screen" is unchecked.

Alternatively, verify the text "<key>allowLockScreenNotificationsView</key> <false/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the management policy.

5. Tap "Restrictions".

6. Verify "Notifications view on lock screen not allowed" is present.

If "Show Notification Center in Lock screen" is checked in the Apple iOS/iPadOS management tool, "<key>allowLockScreenNotificationsView</key> <true/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "Notifications View on lock screen not allowed", this is a finding.

Check System
C-60799r904240_chk
Fix Reference
F-60740r904241_fix
Fix Text

Install a configuration profile to disable Notification Center from the device lock screen.

Identities
CCI-000060

Conceal, via the device lock, information previously visible on the display with a publicly viewable image.

  • 800-53 :: AC-11 (1)
  • 800-53 Rev. 4 :: AC-11 (1)
  • 800-53 Rev. 5 :: AC-11 (1)
  • 800-53A :: AC-11 (1).1
Group Title
PP-MDF-333080
Group ID
V-257115
Rule Version
AIOS-16-707600
Rule Title
Apple iOS/iPadOS 16 must not display notifications (calendar information) when the device is locked.
Rule ID
SV-257115r904245_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

Many mobile devices display notifications on the lock screen so users can obtain relevant information in a timely manner without having to frequently unlock the phone to determine if there are new notifications. However, in many cases, these notifications can contain sensitive information. When they are available on the lock screen, an adversary can see them merely by being in close physical proximity to the device. Configuring the MOS to not send notifications to the lock screen mitigates this risk.

SFR ID: FMT_SMF_EXT.1.1 #18

Documentable
False
Check Content

Review configuration settings to confirm "Show Today view in Lock screen" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Show Today view in Lock screen" is unchecked.

Alternatively, verify the text "<key>allowLockScreenTodayView</key><false/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "Profiles & Device Management" or Profiles".

4. Tap the Configuration Profile from the iOS management tool containing the management policy.

5. Tap "Restrictions".

6. Verify "Today view on lock screen not allowed" is present.

If "Show Today view in Lock screen" is checked in the Apple iOS/iPadOS management tool, "<key>allowLockScreenTodayView</key><true/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "Today view on lock screen not allowed", this is a finding.

Check System
C-60800r904243_chk
Fix Reference
F-60741r904244_fix
Fix Text

Install a configuration profile to disable "Show Today view in Lock screen" from the device lock screen.

Identities
CCI-000060

Conceal, via the device lock, information previously visible on the display with a publicly viewable image.

  • 800-53 :: AC-11 (1)
  • 800-53 Rev. 4 :: AC-11 (1)
  • 800-53 Rev. 5 :: AC-11 (1)
  • 800-53A :: AC-11 (1).1
Group Title
PP-MDF-333240
Group ID
V-257117
Rule Version
AIOS-16-709200
Rule Title
Apple iOS/iPadOS 16 must be configured to not allow backup of [all applications, configuration data] to locally connected systems.
Rule ID
SV-257117r904251_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

Data on mobile devices is protected by numerous mechanisms, including user authentication, access control, and cryptography. When the data is backed up to an external system (either locally connected or cloud based), many if not all of these mechanisms are no longer present. This leaves the backed-up data vulnerable to attack. Disabling backup to external systems mitigates this risk.

SFR ID: FMT_SMF_EXT.1.1 #40

Documentable
False
Check Content

Review configuration settings to confirm backup in management apps is disabled and "Encrypt local backup" is enabled in iTunes (for Windows computer) and in Finder on Mac.

Note: iTunes Backup/Finder Backup is implemented by the configuration policy rule "Force encrypted backups", which is included in AIOS-16-010700 and therefore not included in the procedure below.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify backing up app data is disabled.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Apps".

6. Tap a "managed app".

7. Verify "App data will not be backed up" is listed.

Note: Steps 6 and 7 must be performed for each managed app.

If backing up app data is not disabled in the Apple iOS/iPadOS management tool or "app data will not be backed up" is not listed for each managed app on the iPhone and iPad, this is a finding.

Check System
C-60802r904249_chk
Fix Reference
F-60743r904250_fix
Fix Text

Install a configuration profile to disable backup of managed apps.

Identities
CCI-001090

Prevent unauthorized and unintended information transfer via shared system resources.

  • 800-53 :: SC-4
  • 800-53 Rev. 4 :: SC-4
  • 800-53 Rev. 5 :: SC-4
  • 800-53A :: SC-4.1
Group Title
PP-MDF-333280
Group ID
V-257118
Rule Version
AIOS-16-709700
Rule Title
Apple iOS/iPadOS 16 must not allow non-DOD applications to access DOD data.
Rule ID
SV-257118r904254_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

App data sharing gives apps the ability to access the data of other apps for enhanced user functionality. However, sharing also poses a significant risk that unauthorized users or apps will obtain access to sensitive DOD information. To mitigate this risk, there are data sharing restrictions. If a user is allowed to make exceptions to the data sharing restriction policy, the user could enable unauthorized sharing of data, leaving it vulnerable to breach. Limiting the granting of exceptions to either the administrator or common application developer mitigates this risk.

Copy/paste of data between applications in different application processes or groups of application processes is considered an exception to the access control policy; therefore, the administrator must be able to enable/disable the feature. Other exceptions include allowing any data or application sharing between process groups.

SFR ID: FMT_SMF_EXT.1.1 #42, FDP_ACF_EXT.1.2

Documentable
False
Check Content

Review configuration settings to confirm "Allow documents from managed apps in unmanaged apps" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the iOS management tool, verify "Allow documents from managed apps in unmanaged apps" is unchecked.

Alternatively, verify the text "<key>allowOpenFromManagedToUnmanaged</key><false/>" appears in the configuration profile (.mobileconfig file).

On the iOS device:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Opening documents from managed to unmanaged apps not allowed" is listed.

If "Allow documents from managed apps in unmanaged apps" is checked in the iOS management tool, "<key>allowOpenFromManagedToUnmanaged</key><true/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "Opening documents from managed to unmanaged apps not allowed", this is a finding.

Check System
C-60803r904252_chk
Fix Reference
F-60744r904253_fix
Fix Text

Install a configuration profile to prevent non-DOD applications from accessing DOD data.

Identities
CCI-002233

Prevent the organization-defined software from executing at higher privilege levels than users executing the software.

  • 800-53 Rev. 4 :: AC-6 (8)
  • 800-53 Rev. 5 :: AC-6 (8)
CCI-002530

Maintain a separate execution domain for each executing system process.

  • 800-53 Rev. 4 :: SC-39
  • 800-53 Rev. 5 :: SC-39
Group Title
PP-MDF-333300
Group ID
V-257119
Rule Version
AIOS-16-709900
Rule Title
Apple iOS/iPadOS 16 must be configured to wipe enterprise data and apps upon unenrollment from MDM.
Rule ID
SV-257119r904257_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

When a mobile device is no longer going to be managed by MDM technologies, its protected/sensitive data must be sanitized because it will no longer be protected by the MDM software, putting it at much greater risk of unauthorized access and disclosure.

Satisfies: PP-MDF-333300, PP-MDF-333310

SFR ID: FMT_SMF_EXT.2.1

Documentable
False
Check Content

Note: Not all Apple iOS/iPadOS deployments involve MDM. If the site uses an authorized alternative to MDM for distribution of configuration profiles (Apple Configurator), this check procedure is not applicable.

This check procedure is performed on the Apple iOS/iPadOS management tool or on the iOS device.

In the Apple iOS/iPadOS management tool, for each managed app, verify the app is configured to be removed when the MDM profile is removed.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the management policy.

5. Tap "Apps".

6. Tap an app and verify "App and data will be removed when device is no longer managed" is listed.

Repeat steps 5 and 6 for each managed app in the list.

If one or more managed apps are not set to be removed upon device MDM unenrollment, this is a finding.

Check System
C-60804r904255_chk
Fix Reference
F-60745r904256_fix
Fix Text

Install a configuration profile to delete all managed apps upon device unenrollment. This setting is normally configured on each managed app in the MDM.

Identities
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
CCI-001033

Defines circumstances requiring sanitization of portable storage devices prior to connecting such devices to the system.

  • 800-53 :: MP-6 (3)
  • 800-53 Rev. 4 :: MP-6 (3)
  • 800-53 Rev. 5 :: MP-6 (3)
  • 800-53A :: MP-6 (3).1 (i)
Group Title
PP-MDF-993300
Group ID
V-257121
Rule Version
AIOS-16-710700
Rule Title
Apple iOS/iPadOS 16 must implement the management setting: Encrypt iTunes backups/Encrypt local backup.
Rule ID
SV-257121r904263_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

When syncing an iPhone and iPad to a computer running iTunes, iTunes will prompt the user to back up the iPhone and iPad. If the performed backup is not encrypted, this could lead to the unauthorized disclosure of DOD sensitive information if non-DOD personnel are able to access that machine. Forcing the backup to be encrypted greatly mitigates the risk of compromising sensitive data. iTunes backup and USB connections to computers are not authorized, but this control provides defense-in-depth for cases in which a user violates policy either intentionally or inadvertently.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable
False
Check Content

Review configuration settings to confirm "Force encrypted backups" is enabled in iTunes (Windows) or Finder (Mac).

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Encrypt local backup" is checked.

Alternatively, verify the text "<key>forceEncryptedBackup</key><true/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Encrypt backups enforced" is listed.

If "Encrypt local backup" is unchecked in the Apple iOS/iPadOS management tool, "<key>forceEncryptedBackup</key><false/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "Encrypt backups enforced", this is a finding.

Check System
C-60806r904261_chk
Fix Reference
F-60747r904262_fix
Fix Text

Install a configuration profile to force encrypted backups to iTunes.

Identities
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
CCI-000370

Manage configuration settings for organization-defined system components using organization-defined automated mechanisms.

  • 800-53 :: CM-6 (1)
  • 800-53 Rev. 4 :: CM-6 (1)
  • 800-53 Rev. 5 :: CM-6 (1)
  • 800-53A :: CM-6 (1).1
CCI-000381

Configure the system to provide only organization-defined mission essential capabilities.

  • 800-53 :: CM-7
  • 800-53 Rev. 4 :: CM-7 a
  • 800-53 Rev. 5 :: CM-7 a
  • 800-53A :: CM-7.1 (ii)
Group Title
PP-MDF-993300
Group ID
V-257124
Rule Version
AIOS-16-711300
Rule Title
Apple iOS/iPadOS 16 must implement the management setting: use SSL for Exchange ActiveSync.
Rule ID
SV-257124r904272_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

Exchange email messages are a form of data in transit and thus are vulnerable to eavesdropping and man-in-the-middle attacks. Secure Sockets Layer (SSL), also referred to as Transport Layer Security (TLS), provides encryption and authentication services that mitigate the risk of breach.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable
False
Check Content

Review configuration settings to confirm "Use SSL" for the Exchange account is enabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Use SSL" is checked under the Exchange payload.

Alternatively, verify the text "<key>SSL</key><true/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the Exchange policy.

5. Tap "Accounts".

6. Tap the name of the Exchange account.

7. Verify "SSL" is set to "Yes".

If "Use SSL" is unchecked in the Apple iOS/iPadOS management tool, "<key>SSL</key><false/>" appears in the configuration profile, or the Exchange policy on the iPhone and iPad has "SSL" set to "No", this is a finding.

Check System
C-60809r904270_chk
Fix Reference
F-60750r904271_fix
Fix Text

Install a configuration profile to use SSL for Exchange ActiveSync.

Identities
CCI-000764

Uniquely identify and authenticate organizational users and associate that unique identification with processes acting on behalf of those users.

  • 800-53 :: IA-2
  • 800-53 Rev. 4 :: IA-2
  • 800-53 Rev. 5 :: IA-2
  • 800-53A :: IA-2.1
Group Title
PP-MDF-993300
Group ID
V-257125
Rule Version
AIOS-16-711400
Rule Title
Apple iOS/iPadOS 16 must implement the management setting: not allow messages in an ActiveSync Exchange account to be forwarded or moved to other accounts in the Apple iOS/iPadOS 16 Mail app.
Rule ID
SV-257125r904275_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

The Apple iOS/iPadOS Mail app can be configured to support multiple email accounts concurrently. These email accounts are likely to involve content of varying degrees of sensitivity (e.g., both personal and enterprise messages). To prevent the unauthorized and undetected forwarding or moving of messages from one account to another, Mail ActiveSync Exchange accounts can be configured to block such behavior. While users may still send a message from the Exchange account to another account, these transactions must involve an Exchange server, enabling audit records of the transaction, filtering of mail content, and subsequent forensic analysis.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable
False
Check Content

Review configuration settings to confirm "Allow messages to be moved" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Allow messages to be moved" is unchecked under the Exchange payload.

Alternatively, verify the text "<key>PreventMove</key><true/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the Exchange policy.

5. Tap "Accounts".

6. Tap the "name of the Exchange account".

7. Verify "Prevent Move" is set to "Yes".

If "Allow messages to be moved" is checked in the Apple iOS/iPadOS management tool, "<key>PreventMove</key><false/>" appears in the configuration profile, or the Exchange policy on the iPhone and iPad has "Prevent Move" set to "No", this is a finding.

Check System
C-60810r904273_chk
Fix Reference
F-60751r904274_fix
Fix Text

Install a configuration profile to prevent Exchange messages from being moved or forwarded between email accounts.

Identities
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
CCI-000370

Manage configuration settings for organization-defined system components using organization-defined automated mechanisms.

  • 800-53 :: CM-6 (1)
  • 800-53 Rev. 4 :: CM-6 (1)
  • 800-53 Rev. 5 :: CM-6 (1)
  • 800-53A :: CM-6 (1).1
CCI-000764

Uniquely identify and authenticate organizational users and associate that unique identification with processes acting on behalf of those users.

  • 800-53 :: IA-2
  • 800-53 Rev. 4 :: IA-2
  • 800-53 Rev. 5 :: IA-2
  • 800-53A :: IA-2.1
Group Title
PP-MDF-993300
Group ID
V-257126
Rule Version
AIOS-16-711500
Rule Title
Apple iOS/iPadOS 16 must implement the management setting: Treat AirDrop as an unmanaged destination.
Rule ID
SV-257126r904278_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

AirDrop is a way to send contact information or photos to other users with AirDrop enabled. This feature enables a possible attack vector for adversaries to exploit. Once the attacker has gained access to the information broadcast by this feature, the attacker may distribute this sensitive information very quickly and without DOD's control or awareness. By disabling this feature, the risk of mass data exfiltration will be mitigated.

Note: If the site uses Apple's optional Automatic Device Enrollment, this control is available as a supervised MDM control.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable
False
Check Content

Review configuration settings to confirm "Treat AirDrop as an unmanaged destination" is enabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Treat AirDrop as unmanaged destination" is checked.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Sharing managed documents using AirDrop not allowed" is listed.

If "Treat AirDrop as unmanaged destination" is disabled in the Apple iOS/iPadOS management tool or the restrictions policy on the iPhone and iPad does not list "Sharing managed documents using AirDrop not allowed", this is a finding.

Check System
C-60811r904276_chk
Fix Reference
F-60752r904277_fix
Fix Text

Install a configuration profile to treat AirDrop as an unmanaged destination.

Identities
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
CCI-002008

For PKI-based authentication, employs an organization-wide methodology for managing the content of PKI trust stores installed across all platforms including networks, operating systems, browsers, and applications.

  • 800-53 Rev. 4 :: IA-5 (14)
  • 800-53 Rev. 5 :: IA-5 (14)
Group Title
PP-MDF-993300
Group ID
V-257128
Rule Version
AIOS-16-711900
Rule Title
Apple iOS/iPadOS 16 users must complete required training.
Rule ID
SV-257128r904284_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

The security posture on iOS devices requires the device user to configure several required policy rules on their device. User-Based Enforcement (UBE) is required for these controls. In addition, if the authorizing official (AO) has approved users' full access to the Apple App Store, users must receive training on risks. If a user is not aware of their responsibilities and does not comply with UBE requirements, the security posture of the iOS mobile device and DOD sensitive data may become compromised.

SFR ID: NA

Documentable
False
Check Content

Review a sample of site User Agreements for iOS device users or similar training records and training course content. Verify iPhone and iPad users have completed required training.

If any iPhone/iPad user has not completed required training, this is a finding.

Check System
C-60813r904282_chk
Fix Reference
F-60754r904283_fix
Fix Text

Have all iPhone and iPad users complete training on the following topics. Users must acknowledge receipt of training via a signed User Agreement or similar written record.

Training topics:

- Operational security concerns introduced by unmanaged applications, including applications using global positioning system (GPS) tracking.

- Must ensure no DOD data is saved in an unmanaged app or transmitted from a personal app (for example, from personal email).

- If the Purebred key management app is used, users are responsible for maintaining positive control of their credentialed device at all times. The DOD PKI certificate policy requires subscribers to maintain positive control of the devices that contain private keys and report any loss of control so the credentials can be revoked. Upon device retirement, turn in, or reassignment, ensure a factory data reset is performed prior to device handoff. Follow mobility service provider decommissioning procedures as applicable.

For User Enrollment sites:

- How to configure inactivity timeout.

- How to configure force device erase after 10 incorrect password attempts.

Identities
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
CCI-000370

Manage configuration settings for organization-defined system components using organization-defined automated mechanisms.

  • 800-53 :: CM-6 (1)
  • 800-53 Rev. 4 :: CM-6 (1)
  • 800-53 Rev. 5 :: CM-6 (1)
  • 800-53A :: CM-6 (1).1
CCI-000381

Configure the system to provide only organization-defined mission essential capabilities.

  • 800-53 :: CM-7
  • 800-53 Rev. 4 :: CM-7 a
  • 800-53 Rev. 5 :: CM-7 a
  • 800-53A :: CM-7.1 (ii)
Group Title
PP-MDF-993300
Group ID
V-257129
Rule Version
AIOS-16-712000
Rule Title
A managed photo app must be used to take and store work-related photos.
Rule ID
SV-257129r904287_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

The iOS Photos app is unmanaged and may sync photos with a device user's personal iCloud account. Therefore, work-related photos must not be taken via the iOS camera app or stored in the Photos app. A managed photo app must be used to take and manage work-related photos.

SFR ID: NA

Documentable
False
Check Content

Review configuration settings to confirm a managed photos app is installed on the iOS device.

This check procedure is performed on the iPhone and iPad.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the DOD Configuration Profile from the Apple iOS/iPadOS management tool.

5. Tap "Apps".

6. Verify a photo capture and management app is listed.

If a managed photo capture and management app is not installed on the iPhone and iPad, this is a finding.

Check System
C-60814r904285_chk
Fix Reference
F-60755r904286_fix
Fix Text

Install a managed photos app to take and manage work-related photos.

Identities
CCI-000097

Restrict the use of organization-controlled portable storage devices by authorized individuals on external systems using organization-defined restrictions.

  • 800-53 :: AC-20 (2)
  • 800-53 Rev. 4 :: AC-20 (2)
  • 800-53 Rev. 5 :: AC-20 (2)
  • 800-53A :: AC-20 (2).1
Group Title
PP-MDF-993300
Group ID
V-257133
Rule Version
AIOS-16-714600
Rule Title
Apple iOS/iPadOS 16 must disable copy/paste of data from managed to unmanaged applications.
Rule ID
SV-257133r904299_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

If a user is able to configure the security setting, the user could inadvertently or maliciously set it to a value that poses unacceptable risk to DOD information systems. An adversary could exploit vulnerabilities created by the weaker configuration to compromise DOD sensitive information.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable
False
Check Content

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the iOS management tool, verify "Require managed pasteboard" is set to "True".

If "Require managed pasteboard" is not set to "True", this is a finding.

Check System
C-60818r904297_chk
Fix Reference
F-60759r904298_fix
Fix Text

Configure the Apple iOS configuration profile to disable copy/paste of data from managed to unmanaged applications.

The procedure for implementing this control will vary depending on the MDM/EMM used by the mobile service provider.

In the MDM console, set "Require managed pasteboard" to "True".

Identities
CCI-000097

Restrict the use of organization-controlled portable storage devices by authorized individuals on external systems using organization-defined restrictions.

  • 800-53 :: AC-20 (2)
  • 800-53 Rev. 4 :: AC-20 (2)
  • 800-53 Rev. 5 :: AC-20 (2)
  • 800-53A :: AC-20 (2).1
CCI-000366

Implement the security configuration settings.

  • 800-53 :: CM-6 b
  • 800-53 Rev. 4 :: CM-6 b
  • 800-53 Rev. 5 :: CM-6 b
  • 800-53A :: CM-6.1 (iv)
CCI-000370

Manage configuration settings for organization-defined system components using organization-defined automated mechanisms.

  • 800-53 :: CM-6 (1)
  • 800-53 Rev. 4 :: CM-6 (1)
  • 800-53 Rev. 5 :: CM-6 (1)
  • 800-53A :: CM-6 (1).1
Group Title
PP-MDF-993300
Group ID
V-257134
Rule Version
AIOS-16-714900
Rule Title
Apple iOS/iPadOS 16 must not allow DOD applications to access non-DOD data.
Rule ID
SV-257134r904302_rule
Rule Severity
Medium
Rule Weight
10.0
Vuln Discussion

App data sharing gives apps the ability to access the data of other apps for enhanced user functionality. However, sharing also poses a significant risk that unauthorized users or apps will obtain access to sensitive DOD information. To mitigate this risk, there are data sharing restrictions. If a user is allowed to make exceptions to the data sharing restriction policy, the user could enable unauthorized sharing of data, leaving it vulnerable to breach. Limiting the granting of exceptions to either the administrator or common application developer mitigates this risk.

Copy/paste of data between applications in different application processes or groups of application processes is considered an exception to the access control policy; therefore, the administrator must be able to enable/disable the feature. Other exceptions include allowing any data or application sharing between process groups.

SFR ID: FMT_SMF_EXT.1.1 #42, FDP_ACF_EXT.1.2

Documentable
False
Check Content

Review configuration settings to confirm "Allow documents from unmanaged apps in managed apps" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the iOS management tool, verify "Allow documents from unmanaged apps in managed apps" is unchecked.

On the iOS device:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Opening documents from unmanaged to managed apps not allowed" is listed.

If "Allow documents from unmanaged apps in managed apps" is checked in the iOS management tool or the restrictions policy on the iPhone and iPad does not list "Opening documents from unmanaged to managed apps not allowed", this is a finding.

Check System
C-60819r904300_chk
Fix Reference
F-60760r904301_fix
Fix Text

Install a configuration profile to prevent DOD applications from accessing non-DOD data.

Identities
CCI-002233

Prevent the organization-defined software from executing at higher privilege levels than users executing the software.

  • 800-53 Rev. 4 :: AC-6 (8)
  • 800-53 Rev. 5 :: AC-6 (8)
CCI-002530

Maintain a separate execution domain for each executing system process.

  • 800-53 Rev. 4 :: SC-39
  • 800-53 Rev. 5 :: SC-39
UNCLASSIFIED