U Apple iOS-iPadOS 17 MDFPP 3-3 BYOAD V1

ℹ️ The items you can view are limited because you do not have a subscription. Contact us at [email protected] to purchase one.

All (35)

Highs (3)

Mediums (24)

Lows (8)

UNCLASSIFIED

Group Title

PP-MDF-331090

Group ID

V-259760

Rule Version

AIOS-17-701000

Rule Title

Apple iOS/iPadOS 17 must allow the administrator (MDM) to perform the following management function: enable/disable VPN protection across the device.

Rule ID

SV-259760r943605_rule

Rule Severity

● Low

Rule Weight

10.0

Vuln Discussion

The system administrator must have the capability to configure VPN access to meet organization-specific policies based on mission needs. Otherwise, a user could inadvertently or maliciously set up a VPN and connect to a network that poses unacceptable risk to DOD information systems. An adversary could exploit vulnerabilities created by the weaker configuration to compromise DOD sensitive information.

SFR ID: FMT_SMF_EXT.1.1 #3

Documentable

False

Check Content

Review the list of unmanaged apps installed on the iPhone and iPad and determine if any third-party VPN clients are installed. If so, verify the VPN app is not configured with a DOD network (work) VPN profile.

This validation procedure is performed on the iOS device only.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap the "VPN and Device Management" line and determine if any "Personal VPN" exists.

4. If not, the requirement has been met.

5. If there are personal VPNs, open each VPN app. Review the list of VPN profiles configured on the VPN client.

6. Verify no DOD network VPN profiles are configured on the VPN client.

If any third-party unmanaged VPN apps are installed (personal VPN) and they have a DOD network VPN profile configured on the client, this is a finding.

Note: This setting cannot be managed by the MDM administrator and is a User-Based Enforcement (UBE) requirement.

Check System

C-63496r943603_chk

Fix Reference

F-63403r943604_fix

Fix Text

If a third-party unmanaged VPN app is installed on the iOS 17 device, do not configure the VPN app with a DOD network VPN profile.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

Group Title

PP-MDF-333250

Group ID

V-259761

Rule Version

AIOS-17-703600

Rule Title

Apple iOS/iPadOS 17 must not allow backup to remote systems (managed applications data stored in iCloud).

Rule ID

SV-259761r943608_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

If a user is able to configure the security setting, the user could inadvertently or maliciously set it to a value that poses unacceptable risk to DOD information systems. An adversary could exploit vulnerabilities created by the weaker configuration to compromise DOD sensitive information.

SFR ID: FMT_MOF_EXT.1.2 #40

Documentable

False

Check Content

Review configuration settings to confirm "Allow managed apps to store data in iCloud" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Allow managed apps to store data in iCloud" is unchecked.

Alternatively, verify the text "<key>allowManagedAppsCloudSync</key> <false/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Managed apps cloud sync not allowed" is listed.

If "Allow managed apps to store data in iCloud" is checked in the Apple iOS/iPadOS management tool, "<key>allowManagedAppsCloudSync</key> <true/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "Managed apps cloud sync not allowed", this is a finding.

Check System

C-63497r943606_chk

Fix Reference

F-63404r943607_fix

Fix Text

Install a configuration profile to prevent DOD applications from storing data in iCloud.

Identities

CCI-000097

Restrict the use of organization-controlled portable storage devices by authorized individuals on external systems using organization-defined restrictions.

800-53 :: AC-20 (2)
800-53 Rev. 4 :: AC-20 (2)
800-53 Rev. 5 :: AC-20 (2)
800-53A :: AC-20 (2).1

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

Group Title

PP-MDF-333250

Group ID

V-259762

Rule Version

AIOS-17-703700

Rule Title

Apple iOS/iPadOS 17 must not allow backup to remote systems (enterprise books).

Rule ID

SV-259762r943611_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

SFR ID: FMT_MOF_EXT.1.2 #40

Documentable

False

Check Content

Review configuration settings to confirm "Allow backup of enterprise books" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Allow backup of enterprise books" is unchecked.

Alternatively, verify the text "<key>allowEnterpriseBookBackup</key> <false/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Backing up enterprise books not allowed" is listed.

If "Allow backup of enterprise books" is checked in the Apple iOS/iPadOS management tool, "<key>allowEnterpriseBookBackup</key> <true/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "Backing up enterprise books not allowed", this is a finding.

Check System

C-63498r943609_chk

Fix Reference

F-63405r943610_fix

Fix Text

Install a configuration profile to prevent backup of enterprise books that could contain DOD sensitive information.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

CCI-002110

The organization defines the information system account types that support the organizational missions/business functions.

800-53 Rev. 4 :: AC-2 a

Group Title

PP-MDF-333024

Group ID

V-259763

Rule Version

AIOS-17-706500

Rule Title

Apple iOS/iPadOS 17 must be configured to enforce a minimum password length of six characters.

Rule ID

SV-259763r943614_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

Password strength is a measure of the effectiveness of a password in resisting guessing and brute force attacks. The ability to crack a password is a function of how many attempts an adversary is permitted, how quickly an adversary can do each attempt, and the size of the password space. The longer the minimum length of the password is, the larger the password space. Having a too-short minimum password length significantly reduces password strength, increasing the chance of password compromise and resulting device and data compromise.

SFR ID: FMT_SMF_EXT.1.1 #1a

Documentable

False

Check Content

Review configuration settings to confirm the minimum passcode length is six or more characters.

This procedure is performed in the Apple iOS/iPadOS management tool and on the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Management tool, verify the "Minimum passcode length" value is set to six or greater.

Alternatively, verify the text "<key>minLength</key> <integer>6</integer>" appears in the configuration profile (.mobileconfig file). It also is acceptable for the integer value to be greater than six.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the password policy.

5. Tap "Restrictions".

6. Tap "Passcode".

7. Verify "Minimum length" is listed as "six or greater".

If the "Minimum passcode length" is less than six characters in the iOS management tool, "<key>minLength</key> " has an integer value of less than six, or the password policy on the iPhone and iPad from the Apple iOS/iPadOS management tool does not list "Minimum length" of six or more, this is a finding.

Check System

C-63499r943612_chk

Fix Reference

F-63406r943613_fix

Fix Text

Install a configuration profile to enforce a minimum passcode length value of six or greater.

Identities

CCI-000205

The information system enforces minimum password length.

800-53 :: IA-5 (1) (a)
800-53 Rev. 4 :: IA-5 (1) (a)
800-53A :: IA-5 (1).1 (i)

Group Title

PP-MDF-333025

Group ID

V-259764

Rule Version

AIOS-17-706600

Rule Title

Apple iOS/iPadOS 17 must be configured to not allow passwords that include more than four repeating or sequential characters.

Rule ID

SV-259764r943617_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

Password strength is a measure of the effectiveness of a password in resisting guessing and brute force attacks. Passwords that contain repeating or sequential characters are significantly easier to guess than those that do not contain repeating or sequential characters. Therefore, disallowing repeating or sequential characters increases password strength and decreases risk.

SFR ID: FMT_SMF_EXT.1.1 #1b

Documentable

False

Check Content

Review configuration settings to confirm simple passcodes are not allowed.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Allow simple value" is unchecked. Alternatively, verify the text "<key>allowSimple</key> <false/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the password policy.

5. Tap "Restrictions".

6. Tap "Passcode".

7. Verify "Simple passcodes allowed" is set to "No".

If "Allow simple value" is checked in the Apple iOS/iPadOS management tool, "<key>allowSimple</key> <true/>" appears in the Configuration Profile, or the password policy on the iPhone and iPad does not have "Simple passcodes allowed" set to "No", this is a finding.

Check System

C-63500r943615_chk

Fix Reference

F-63407r943616_fix

Fix Text

Install a configuration profile to disallow more than four sequential or repeating numbers or letters in the device unlock password.

Identities

CCI-000195

The information system, for password-based authentication, when new passwords are created, enforces that at least an organization-defined number of characters are changed.

800-53 :: IA-5 (1) (b)
800-53 Rev. 4 :: IA-5 (1) (b)
800-53A :: IA-5 (1).1 (v)

Group Title

PP-MDF-333026

Group ID

V-259765

Rule Version

AIOS-17-706700

Rule Title

Apple iOS/iPadOS 17 must be configured to enable a screen-lock policy that will lock the display after a period of inactivity.

Rule ID

SV-259765r943620_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

The screen-lock timeout helps protect the device from unauthorized access. Devices without a screen-lock timeout provide an opportunity for adversaries who gain physical access to the mobile device through loss, theft, etc. Such devices are much more likely to be in an unlocked state when acquired by an adversary, thus granting immediate access to the data on the mobile device and possibly access to DOD networks.

SFR ID: FMT_SMF_EXT.1.1 #2a

Documentable

False

Check Content

Review configuration settings to confirm the screen lock timeout is set to 15 minutes or less.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the management tool, verify the sum of the values assigned to "Maximum Auto-Lock time" and "Grace period for device lock" is between 1 and 15 minutes.

Alternatively, locate the text "<key>maxGracePeriod</key>" and "<key>maxInactivity</key>" and ensure the sum of their integer value is between 1 and 15 in the configuration profile (.mobileconfig file). For example:

"<key>maxGracePeriod</key>

<key>maxInactivity</key>

<integer>5</integer>"

Here, 5 + 5 = 10; so this meets the requirement.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the password policy.

5. Tap "Restrictions".

6. Tap "Passcode".

7. Verify the sum of the "Max grace period" and "Max inactivity" values is less than 15 minutes.

Note: On some iOS/iPadOS devices, it is not possible to have a sum of exactly 15. In these cases, the sum must be less than 15. A sum of 16 does not meet the requirement.

On the management server, if the sum of the "Max grace period" and "Max inactivity" values is not between 1 and 15 minutes in the iOS/iPadOS management tool or the sum of the values assigned to "<key>maxGracePeriod</key>" and "<key>maxInactivity</key>" is not between 1 and 15 minutes in the configuration profile, or if on the iPhone/iPad, the sum of the values assigned to "Max grace period" and "Max inactivity" is not between 1 and 15 minutes, this is a finding.

Check System

C-63501r943618_chk

Fix Reference

F-63408r943619_fix

Fix Text

Install a configuration profile to lock the device display after 15 minutes (or less) of inactivity. This is done by setting "Maximum Auto-Lock time" and "Grace Period for device lock" so the sum of their values is between 1 and 15 minutes.

Identities

CCI-000057

The information system initiates a session lock after the organization-defined time period of inactivity.

800-53 :: AC-11 a
800-53 Rev. 4 :: AC-11 a
800-53 Rev. 5 :: AC-11 a
800-53A :: AC-11.1 (ii)

Group Title

PP-MDF-333030

Group ID

V-259766

Rule Version

AIOS-17-706800

Rule Title

Apple iOS/iPadOS 17 must be configured to lock the display after 15 minutes (or less) of inactivity.

Rule ID

SV-259766r943623_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

The screen lock timeout must be set to a value that helps protect the device from unauthorized access. Having a too-long timeout would increase the window of opportunity for adversaries who gain physical access to the mobile device through loss, theft, etc. Such devices are much more likely to be in an unlocked state when acquired by an adversary, thus granting immediate access to the data on the mobile device. The maximum timeout period of 15 minutes has been selected to balance functionality and security; shorter timeout periods may be appropriate depending on the risks posed to the mobile device.

SFR ID: FMT_SMF_EXT.1.1 #2b

Documentable

False

Check Content

Review configuration settings to confirm the screen lock timeout is set to 15 minutes or less.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the management tool, verify the sum of the values assigned to "Maximum Auto-Lock time" and "Grace period for device lock" is between 1 and 15 minutes.

"<key>maxGracePeriod</key>

<key>maxInactivity</key>

<integer>5</integer>"

Here, 5 + 5 = 10; this meets the requirement.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the password policy.

5. Tap "Restrictions".

6. Tap "Passcode".

7. Verify the sum of the "Max grace period" and "Max inactivity" values is less than 15 minutes.

Note: On some iOS/iPadOS devices, it is not possible to have a sum of exactly 15. In these cases, the sum must be less than 15. A sum of 16 does not meet the requirement.

Check System

C-63502r943621_chk

Fix Reference

F-63409r943622_fix

Fix Text

Identities

CCI-000057

The information system initiates a session lock after the organization-defined time period of inactivity.

800-53 :: AC-11 a
800-53 Rev. 4 :: AC-11 a
800-53 Rev. 5 :: AC-11 a
800-53A :: AC-11.1 (ii)

Group Title

PP-MDF-333040

Group ID

V-259767

Rule Version

AIOS-17-706900

Rule Title

Apple iOS/iPadOS 17 must be configured to not allow more than 10 consecutive failed authentication attempts.

Rule ID

SV-259767r943626_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

The more attempts an adversary has to guess a password, the more likely the adversary will enter the correct password and gain access to resources on the device. Setting a limit on the number of attempts mitigates this risk. Setting the limit at 10 or less gives authorized users the ability to make a few mistakes when entering the password but still provides adequate protection against dictionary or brute force attacks on the password.

SFR ID: FMT_SMF_EXT.1.1 #2c, FIA_AFL_EXT.1.5

Documentable

False

Check Content

Review configuration settings to confirm that consecutive failed authentication attempts is set to 10 or fewer.

This procedure is performed in the Apple iOS/iPadOS management tool and on the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Management tool, verify the "Maximum number of failed attempts" value is set to 10 or fewer.

Alternatively, verify the text "<key>maxFailedAttempts</key> <integer>10</integer>" appears in the configuration profile (.mobileconfig file). It also is acceptable for the integer value to be less than 10.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the password policy.

5. Tap "Restrictions".

6. Tap "Passcode".

7. Verify "Max failed attempts" is listed as "10" or fewer.

If the "Maximum number of failed attempts" is more than 10 in the iOS management tool, "<key>maxFailedAttempts</key> " has an integer value of more than 10, or the password policy on the iPhone and iPad does not list "Max failed attempts" of 10 or fewer, this is a finding.

Check System

C-63503r943624_chk

Fix Reference

F-63410r943625_fix

Fix Text

Install a configuration profile to allow only 10 or fewer consecutive failed authentication attempts.

Identities

CCI-000044

Enforce the organization-defined limit of consecutive invalid logon attempts by a user during the organization-defined time period.

800-53 :: AC-7 a
800-53 Rev. 4 :: AC-7 a
800-53 Rev. 5 :: AC-7 a
800-53A :: AC-7.1 (ii)

Group Title

PP-MDF-993300

Group ID

V-259768

Rule Version

AIOS-17-706950

Rule Title

Apple iOS/iPadOS 17 must be configured to enforce a passcode reuse prohibition of at least two generations.

Rule ID

SV-259768r943629_rule

Rule Severity

● High

Rule Weight

10.0

Vuln Discussion

iOS/iPadOS 17 includes a new feature that allows the previous passcode to be valid for 72 hours after a passcode change. If the previous passcode has been compromised and the attacker has access to it and the Apple device, enterprise data and the enterprise network can be compromised. Currently there is no MDM control to force the old passcode to expire immediately after passcode change. The previous passcode will expire immediately after a passcode change if the MDM password history control is implemented.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable

False

Check Content

Review configuration settings to confirm the Apple iOS or iPadOS device has a passcode reuse prohibition of at least two generations.

This procedure is performed in the Apple iOS/iPadOS management tool and on the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Management tool, verify the "Passcode History" value is set to two or greater.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the password policy.

5. Tap "Restrictions".

6. Tap "Passcode".

7. Verify "Number of unique recent passcodes required" is listed as "two" or greater.

If the Apple iOS or iPadOS device does not enforce a passcode reuse prohibition of at least two generations, this is a finding.

Check System

C-63504r943627_chk

Fix Reference

F-63411r943628_fix

Fix Text

Install a configuration profile to enforce a passcode reuse prohibition of at least two generations (passcode history).

Identities

CCI-000200

The information system prohibits password reuse for the organization-defined number of generations.

800-53 :: IA-5 (1) (e)
800-53 Rev. 4 :: IA-5 (1) (e)
800-53A :: IA-5 (1).1 (v)

Group Title

PP-MDF-333050

Group ID

V-259769

Rule Version

AIOS-17-707000

Rule Title

Apple iOS/iPadOS 17 must be configured to enforce an application installation policy by specifying one or more authorized application repositories, including [selection: DOD-approved commercial app repository, MDM server, mobile application store].

Rule ID

SV-259769r943632_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

Forcing all applications to be installed from authorized application repositories can prevent unauthorized and malicious applications from being installed and executed on mobile devices. Allowing such installations and executions could cause a compromise of DOD data accessible by these unauthorized/malicious applications.

SFR ID: FMT_SMF_EXT.1.1 #8a

Documentable

False

Check Content

Review configuration settings to confirm "Allow Trusting New Enterprise App Authors" is disabled.

This procedure is performed in the Apple iOS/iPadOS management tool and on the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Management tool, verify "Allow Trusting New Enterprise App Authors" is disabled.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Trusting enterprise apps not allowed" is listed.

If "Allow Trusting New Enterprise App Authors" is not disabled in the iOS/iPadOS management tool or on the iPhone and iPad, this is a finding.

Check System

C-63505r943630_chk

Fix Reference

F-63412r943631_fix

Fix Text

Install a configuration profile to disable "Allow Trusting New Enterprise App Authors".

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

Group Title

PP-MDF-333070

Group ID

V-259770

Rule Version

AIOS-17-707400

Rule Title

Apple iOS/iPadOS 17 allow list must be configured to not include applications with the following characteristics: - backs up MD data to non-DOD cloud servers (including user and application access to cloud backup services); - transmits MD diagnostic data to non-DOD servers; - allows synchronization of data or applications between devices associated with user; and - allows unencrypted (or encrypted but not FIPS 140-2/FIPS 140-3 validated) data sharing with other MDs or printers.

Rule ID

SV-259770r943635_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

Requiring all authorized applications to be in an application allow list prevents the execution of any applications (e.g., unauthorized, malicious) that are not part of the allow list. Failure to configure an application allow list properly could allow unauthorized and malicious applications to be downloaded, installed, and executed on the mobile device, causing a compromise of DOD data accessible by these applications. Applications with the listed characteristics have features that can cause the compromise of sensitive DOD data or have features with no known application in the DOD environment.

Application note: The application allow list, in addition to controlling the installation of applications on the MD, must control user access/execution of all core and preinstalled applications, or the MD must provide an alternate method of restricting user access/execution to core and preinstalled applications.

Core application: Any application integrated into the OS by the OS or MD vendors.

Preinstalled application: Additional noncore applications included in the OS build by the OS vendor, MD vendor, or wireless carrier.

SFR ID: FMT_SMF_EXT.1.1 #8b

Documentable

False

Check Content

Verify no apps with the following prohibited characteristics are included in the configuration profile:

- backs up MD data to non-DOD cloud servers (including user and application access to cloud backup services);

- transmits MD diagnostic data to non-DOD servers;

- allows synchronization of data or applications between devices associated with user; and

- allows unencrypted (or encrypted but not FIPS 140-2/FIPS 140-3 validated) data sharing with other MDs or printers.

This check procedure is performed on the Apple iOS/iPadOS management tool.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Allow Listed App" (allowlistedAppBundleIDs) is configured and there are no apps with prohibited characteristics.

If "Allow listed apps" is not configured and contains apps with prohibited characteristics, this is a finding.

Check System

C-63506r943633_chk

Fix Reference

F-63413r943634_fix

Fix Text

Install a configuration profile with an allow list of approved apps (allowlistedAppBundleIDs). Ensure the allow list does not include apps with the following characteristics:

- Backs up MD data to non-DOD cloud servers (including user and application access to cloud backup services).

- Transmits MD diagnostic data to non-DOD servers.

- Allows synchronization of data or applications between devices associated with user.

- Allows unencrypted (or encrypted but not FIPS 140-2/FIPS 140-3 validated) data sharing with other MDs or printers.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

Group Title

PP-MDF-333080

Group ID

V-259771

Rule Version

AIOS-17-707500

Rule Title

Apple iOS/iPadOS 17 must be configured to not display notifications when the device is locked.

Rule ID

SV-259771r943638_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

Many mobile devices display notifications on the lock screen so users can obtain relevant information in a timely manner without having to frequently unlock the phone to determine if there are new notifications. However, in many cases, these notifications can contain sensitive information. When they are available on the lock screen, an adversary can see them merely by being in close physical proximity to the device. Configuring the mobile operating system to not send notifications to the lock screen mitigates this risk.

SFR ID: FMT_SMF_EXT.1.1 #18

Documentable

False

Check Content

Review configuration settings to confirm the display of notifications when the device is locked has been disabled. There are two acceptable methods. The first method is preferred.

Verification Procedure for Method 1:

This check procedure is performed only on the Apple iOS/iPadOS management tool.

In the Apple iOS/iPadOS management tool, for each managed app, verify the app is configured to disable Notifications preview.

If one or more managed apps are not set to disable notification previews, this is a finding.

Verification Procedure for Method 2:

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Show Notification Center in Lock screen" is unchecked.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the management policy.

5. Tap "Restrictions".

6. Verify "Notifications view on lock screen not allowed" is present.

If "Show Notification Center in Lock screen" is checked in the Apple iOS/iPadOS management tool or the restrictions policy on the iPhone and iPad does not list "Notifications View on lock screen not allowed", this is a finding.

Check System

C-63507r943636_chk

Fix Reference

F-63414r943637_fix

Fix Text

Install a configuration profile to disable the display of notifications when the device is locked. There are two acceptable methods. The first method is preferred.

Method 1:

Install a configuration profile to disable notifications for each managed app if device screen is locked. This method is not supported by all MDM servers.

Method 2:

Install a configuration profile to disable Notification Center from the device Lock screen.

Identities

CCI-000060

Conceal, via the device lock, information previously visible on the display with a publicly viewable image.

800-53 :: AC-11 (1)
800-53 Rev. 4 :: AC-11 (1)
800-53 Rev. 5 :: AC-11 (1)
800-53A :: AC-11 (1).1

Group Title

PP-MDF-333080

Group ID

V-259772

Rule Version

AIOS-17-707600

Rule Title

Apple iOS/iPadOS 17 must not display notifications (calendar information) when the device is locked.

Rule ID

SV-259772r943641_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

SFR ID: FMT_SMF_EXT.1.1 #18

Documentable

False

Check Content

Review configuration settings to confirm "Show Today view in Lock screen" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Show Today view in Lock screen" is unchecked.

Alternatively, verify the text "<key>allowLockScreenTodayView</key><false/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "Profiles & Device Management" or Profiles".

4. Tap the Configuration Profile from the iOS management tool containing the management policy.

5. Tap "Restrictions".

6. Verify "Today view on lock screen not allowed" is present.

If "Show Today view in Lock screen" is checked in the Apple iOS/iPadOS management tool, "<key>allowLockScreenTodayView</key><true/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "Today view on lock screen not allowed", this is a finding.

Check System

C-63508r943639_chk

Fix Reference

F-63415r943640_fix

Fix Text

Install a configuration profile to disable "Show Today view in Lock screen" from the device lock screen.

Identities

CCI-000060

Conceal, via the device lock, information previously visible on the display with a publicly viewable image.

800-53 :: AC-11 (1)
800-53 Rev. 4 :: AC-11 (1)
800-53 Rev. 5 :: AC-11 (1)
800-53A :: AC-11 (1).1

Group Title

PP-MDF-333160

Group ID

V-259773

Rule Version

AIOS-17-708400

Rule Title

Apple iOS/iPadOS 17 must be configured to display the DOD advisory warning message at startup or each time the user unlocks the device.

Rule ID

SV-259773r943644_rule

Rule Severity

● Low

Rule Weight

10.0

Vuln Discussion

Before granting access to the system, the mobile operating system is required to display the DOD-approved system use notification message or banner that provides privacy and security notices consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance. Required banners help ensure the DOD can audit and monitor the activities of mobile device users without legal restriction.

System use notification messages can be displayed when individuals first access or unlock the mobile device. The banner must be implemented as a "click-through" banner at device unlock (to the extent permitted by the operating system). A "click-through" banner prevents further activity on the information system unless and until the user executes a positive action to manifest agreement by clicking on a box indicating "OK".

The approved DOD text must be used exactly as required in the Knowledge Service referenced in DODI 8500.01. For devices accommodating banners of 1300 characters, the banner text is:

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.

By using this IS (which includes any device attached to this IS), you consent to the following conditions:

-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.

-At any time, the USG may inspect and seize data stored on this IS.

-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.

-This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy.

-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. Refer to User Agreement for details.

For devices with severe character limitations, the banner text is:

I've read & consent to terms in IS user agreem't.

The administrator must configure the banner text exactly as written without any changes.

SFR ID: FMT_SMF_EXT.1.1 #36

Documentable

False

Check Content

The DOD warning banner can be displayed by either of the following methods (required text is found in the Vulnerability Discussion):

Method 1:

By placing the DOD warning banner text in the user agreement signed by each iPhone and iPad user.

Method 2:

By installing a Lock Screen Message payload with the required text (preferred method).

Determine which method is used at the iOS device site and follow the appropriate validation procedure below.

Validation Procedure for Method 1:

Review the signed user agreements for several iOS device users and verify the agreement includes the required DOD warning banner text.

Validation Procedure for Method 2:

In the Apple iOS/iPadOS management tool, verify a Lock Screen Message payload has been installed on each managed device. The LockScreenFootnote string should include required text.

If for Method 1, the required warning banner text is not on all signed user agreements reviewed, or for Method 2, the DOD warning banner text is not set as the lock screen footnote, this is a finding.

Check System

C-63509r943642_chk

Fix Reference

F-63416r943643_fix

Fix Text

Configure the DOD warning banner by either of the following methods (required text is found in the Vulnerability Discussion):

Method 1:

By placing the DOD warning banner text in the user agreement signed by each iOS device user.

Method 2:

By installing a Lock Screen Message payload with the required text (preferred method).

Identities

CCI-000048

Display an organization-defined system use notification message or banner to users before granting access to the system that provides privacy and security notices consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidelines.

800-53 :: AC-8 a
800-53 Rev. 4 :: AC-8 a
800-53 Rev. 5 :: AC-8 a
800-53A :: AC-8.1 (ii)

Group Title

PP-MDF-333240

Group ID

V-259774

Rule Version

AIOS-17-709200

Rule Title

Apple iOS/iPadOS 17 must be configured to not allow backup of [all applications, configuration data] to locally connected systems.

Rule ID

SV-259774r943647_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

Data on mobile devices is protected by numerous mechanisms, including user authentication, access control, and cryptography. When the data is backed up to an external system (either locally connected or cloud based), many if not all of these mechanisms are no longer present. This leaves the backed-up data vulnerable to attack. Disabling backup to external systems mitigates this risk.

SFR ID: FMT_SMF_EXT.1.1 #40

Documentable

False

Check Content

Review configuration settings to confirm backup in management apps is disabled and "Encrypt local backup" is enabled in iTunes (for Windows computer) and in Finder on Mac.

Note: iTunes Backup/Finder backup is implemented by the configuration policy rule "Force encrypted backups", which is included in AIOS-17-710700 and therefore not included in the procedure below.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify backing up app data is disabled.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Apps".

6. Tap a "managed app".

7. Verify "App data will not be backed up" is listed.

Note: Steps 6 and 7 must be performed for each managed app.

If backing up app data is not disabled in the Apple iOS/iPadOS management tool or "app data will not be backed up" is not listed for each managed app on the iPhone and iPad, this is a finding.

Check System

C-63510r943645_chk

Fix Reference

F-63417r943646_fix

Fix Text

Install a configuration profile to disable backup of managed apps.

Identities

CCI-001090

Prevent unauthorized and unintended information transfer via shared system resources.

800-53 :: SC-4
800-53 Rev. 4 :: SC-4
800-53 Rev. 5 :: SC-4
800-53A :: SC-4.1

Group Title

PP-MDF-333280

Group ID

V-259775

Rule Version

AIOS-17-709700

Rule Title

Apple iOS/iPadOS 17 must not allow non-DOD applications to access DOD data.

Rule ID

SV-259775r943650_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

App data sharing gives apps the ability to access the data of other apps for enhanced user functionality. However, sharing also poses a significant risk that unauthorized users or apps will obtain access to sensitive DOD information. To mitigate this risk, there are data sharing restrictions. If a user is allowed to make exceptions to the data sharing restriction policy, the user could enable unauthorized sharing of data, leaving it vulnerable to breach. Limiting the granting of exceptions to either the administrator or common application developer mitigates this risk.

Copy/paste of data between applications in different application processes or groups of application processes is considered an exception to the access control policy; therefore, the administrator must be able to enable/disable the feature. Other exceptions include allowing any data or application sharing between process groups.

SFR ID: FMT_SMF_EXT.1.1 #42, FDP_ACF_EXT.1.2

Documentable

False

Check Content

Review configuration settings to confirm "Allow documents from managed apps in unmanaged apps" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the iOS management tool, verify "Allow documents from managed apps in unmanaged apps" is unchecked.

Alternatively, verify the text "<key>allowOpenFromManagedToUnmanaged</key><false/>" appears in the configuration profile (.mobileconfig file).

On the iOS device:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Opening documents from managed to unmanaged apps not allowed" is listed.

If "Allow documents from managed apps in unmanaged apps" is checked in the iOS management tool, "<key>allowOpenFromManagedToUnmanaged</key><true/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "Opening documents from managed to unmanaged apps not allowed", this is a finding.

Check System

C-63511r943648_chk

Fix Reference

F-63418r943649_fix

Fix Text

Install a configuration profile to prevent non-DOD applications from accessing DOD data.

Identities

CCI-002233

Prevent the organization-defined software from executing at higher privilege levels than users executing the software.

800-53 Rev. 4 :: AC-6 (8)
800-53 Rev. 5 :: AC-6 (8)

CCI-002530

Maintain a separate execution domain for each executing system process.

800-53 Rev. 4 :: SC-39
800-53 Rev. 5 :: SC-39

Group Title

PP-MDF-333300

Group ID

V-259776

Rule Version

AIOS-17-709900

Rule Title

Apple iOS/iPadOS 17 must be configured to [selection: wipe protected data, wipe sensitive data] upon unenrollment from MDM.

Rule ID

SV-259776r943653_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

When a mobile device is no longer going to be managed by MDM technologies, its protected/sensitive data must be sanitized because it will no longer be protected by the MDM software, putting it at much greater risk of unauthorized access and disclosure. At least one of the two options must be selected.

SFR ID: FMT_SMF_EXT.2.1

Documentable

False

Check Content

Note: Not all Apple iOS/iPadOS deployments involve MDM. If the site uses an authorized alternative to MDM for distribution of configuration profiles (Apple Configurator), this check procedure is not applicable.

This check procedure is performed on the Apple iOS/iPadOS management tool or on the iOS device.

In the Apple iOS/iPadOS management tool, for each managed app, verify the app is configured to be removed when the MDM profile is removed.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the management policy.

5. Tap "Apps".

6. Tap an app and verify "App and data will be removed when device is no longer managed" is listed.

Repeat steps 5 and 6 for each managed app in the list.

If one or more managed apps are not set to be removed upon device MDM unenrollment, this is a finding.

Check System

C-63512r943651_chk

Fix Reference

F-63419r943652_fix

Fix Text

Install a configuration profile to delete all managed apps upon device unenrollment.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

CCI-001033

Defines circumstances requiring sanitization of portable storage devices prior to connecting such devices to the system.

800-53 :: MP-6 (3)
800-53 Rev. 4 :: MP-6 (3)
800-53 Rev. 5 :: MP-6 (3)
800-53A :: MP-6 (3).1 (i)

Group Title

PP-MDF-333310

Group ID

V-259777

Rule Version

AIOS-17-710000

Rule Title

Apple iOS/iPadOS 17 must be configured to [selection: remove Enterprise applications, remove all noncore applications (any nonfactory installed application)] upon unenrollment from MDM.

Rule ID

SV-259777r943656_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

When a mobile device will no longer be managed by MDM technologies, its protected/sensitive data must be sanitized because it will no longer be protected by the MDM software, putting it at much greater risk of unauthorized access and disclosure. At least one of the two options must be selected.

SFR ID: FMT_SMF_EXT.2.1

Documentable

False

Check Content

This check procedure is performed on the Apple iOS/iPadOS management tool or on the iOS device.

In the Apple iOS/iPadOS management tool, for each managed app, verify the app is configured to be removed when the MDM profile is removed.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the management policy.

5. Tap "Apps".

6. Tap an app and verify "App and data will be removed when device is no longer managed" is listed.

Repeat steps 5 and 6 for each managed app in the list.

If one or more managed apps are not set to be removed upon device MDM unenrollment, this is a finding.

Check System

C-63513r943654_chk

Fix Reference

F-63420r943655_fix

Fix Text

Install a configuration profile to delete all managed apps upon device unenrollment.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

CCI-001033

Defines circumstances requiring sanitization of portable storage devices prior to connecting such devices to the system.

800-53 :: MP-6 (3)
800-53 Rev. 4 :: MP-6 (3)
800-53 Rev. 5 :: MP-6 (3)
800-53A :: MP-6 (3).1 (i)

Group Title

PP-MDF-993300

Group ID

V-259778

Rule Version

AIOS-17-710400

Rule Title

Apple iOS/iPadOS 17 must require a valid password be successfully entered before the mobile device data is unencrypted.

Rule ID

SV-259778r943659_rule

Rule Severity

● High

Rule Weight

10.0

Vuln Discussion

Passwords provide a form of access control that prevents unauthorized individuals from accessing computing resources and sensitive data. Passwords may also be a source of entropy for generation of key encryption or data encryption keys. If a password is not required to access data, this data is accessible to any adversary who obtains physical possession of the device. Requiring that a password be successfully entered before the mobile device data is unencrypted mitigates this risk.

Note: MDF PP requires a Password Authentication Factor and requires management of its length and complexity. It leaves open whether the existence of a password is subject to management. This requirement addresses the configuration to require a password, which is critical to the cybersecurity posture of the device.

SFR ID: FIA_UAU_EXT.1.1

Documentable

False

Check Content

Review configuration settings to confirm the device is set to require a passcode before use.

This procedure is performed on the iOS and iPadOS device.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the password policy.

5. Tap "Restrictions".

6. Tap "Passcode".

7. Verify "Passcode required" is set to "Yes".

If "Passcode required" is not set to "Yes", this is a finding.

Check System

C-63514r943657_chk

Fix Reference

F-63421r943658_fix

Fix Text

Install a configuration profile to require a password to unlock the device.

Identities

CCI-001199

Protects the confidentiality and/or integrity of organization-defined information at rest.

800-53 :: SC-28
800-53 Rev. 4 :: SC-28
800-53 Rev. 5 :: SC-28
800-53A :: SC-28.1

Group Title

PP-MDF-993300

Group ID

V-259779

Rule Version

AIOS-17-710700

Rule Title

Apple iOS/iPadOS 17 must implement the management setting: Encrypt backups/Encrypt local backup.

Rule ID

SV-259779r943662_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

If iCloud backups are not encrypted, this could lead to the unauthorized disclosure of DOD sensitive information if non-DOD personnel are able to access that machine. Forcing the backup to be encrypted greatly mitigates the risk of compromising sensitive data. Work data iCloud backup and USB connections to computers are not authorized, but this control provides defense-in-depth for cases in which a user violates policy either intentionally or inadvertently.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable

False

Check Content

Review configuration settings to confirm "Force encrypted backups" is enabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Encrypt local backup" is checked.

Alternatively, verify the text "<key>forceEncryptedBackup</key><true/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Encrypt backups enforced" is listed.

If "Encrypt local backup" is unchecked in the Apple iOS/iPadOS management tool, "<key>forceEncryptedBackup</key><false/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "Encrypt backups enforced", this is a finding.

Check System

C-63515r943660_chk

Fix Reference

F-63422r943661_fix

Fix Text

Install a configuration profile to force encrypted backups to iCloud.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

CCI-000381

Configure the system to provide only organization-defined mission essential capabilities.

800-53 :: CM-7
800-53 Rev. 4 :: CM-7 a
800-53 Rev. 5 :: CM-7 a
800-53A :: CM-7.1 (ii)

Group Title

PP-MDF-993300

Group ID

V-259780

Rule Version

AIOS-17-710900

Rule Title

Apple iOS/iPadOS 17 must implement the management setting: require the user to enter a password when connecting to an AirPlay-enabled device.

Rule ID

SV-259780r943665_rule

Rule Severity

● Low

Rule Weight

10.0

Vuln Discussion

When a user is allowed to use AirPlay without a password, it may mistakenly associate the iPhone and iPad with an AirPlay-enabled device other than the one intended (i.e., by choosing the wrong one from the AirPlay list displayed). This creates the potential for someone in control of a mistakenly associated device to obtain DOD sensitive information without authorization. Requiring a password before such an association mitigates this risk. Passwords do not require any administration and are not required to comply with any complexity requirements.

SFR ID: FMT_SMF_EXT.1.1 #40

Documentable

False

Check Content

Review configuration settings to confirm "Require passcode on outgoing AirPlay request" is enabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Require passcode on outgoing AirPlay request" is checked.

Alternatively, verify the text "<key>forceAirPlayOutgoingRequestsPairingPassword</key><false/>" appears in the configuration profile (.mobileconfig file).

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "AirPlay outgoing requests pairing password enforced" is listed.

If "Require passcode on outgoing AirPlay request" is unchecked in the Apple iOS/iPadOS management tool, "<key>forceAirPlayOutgoingRequestsPairingPassword</key><true/>" appears in the configuration profile, or the restrictions policy on the iPhone and iPad does not list "AirPlay outgoing requests pairing password enforced", this is a finding.

Check System

C-63516r943663_chk

Fix Reference

F-63423r943664_fix

Fix Text

Install a configuration profile to require the user to enter a password when connecting to an AirPlay-enabled device.

Identities

CCI-000063

The organization defines allowed methods of remote access to the information system.

800-53 :: AC-17 a
800-53 Rev. 4 :: AC-17 a
800-53A :: AC-17.1 (i)

Group Title

PP-MDF-993300

Group ID

V-259781

Rule Version

AIOS-17-710950

Rule Title

Apple iOS/iPadOS 17 must implement the management setting: require passcode for incoming Airplay connection requests.

Rule ID

SV-259781r943668_rule

Rule Severity

● Low

Rule Weight

10.0

Vuln Discussion

When an incoming AirPlay request is allowed without a password, it may mistakenly associate the iPhone and iPad with an AirPlay-enabled device other than the one intended (i.e., by choosing the wrong one from the AirPlay list displayed). This creates the potential for someone in control of a mistakenly associated device to obtain DOD sensitive information without authorization. Requiring a password before such an association mitigates this risk. Passwords do not require any administration and are not required to comply with any complexity requirements.

SFR ID: FMT_SMF_EXT.1.1 #40

Documentable

False

Check Content

Review configuration settings to confirm "Require passcode for incoming AirPlay connection requests" is enabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Require passcode for incoming AirPlay connection requests" is checked.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "AirPlay incoming requests pairing password enforced" is listed.

If "Require passcode for incoming AirPlay connection requests" is unchecked in the Apple iOS/iPadOS management tool or the restrictions policy on the iPhone and iPad does not list "AirPlay incoming requests pairing password enforced", this is a finding.

Check System

C-63517r943666_chk

Fix Reference

F-63424r943667_fix

Fix Text

Install a configuration profile to require that incoming AirPlay connection requests enter a password when connecting to a DOD iOS/iPadOS device.

Identities

CCI-000063

The organization defines allowed methods of remote access to the information system.

800-53 :: AC-17 a
800-53 Rev. 4 :: AC-17 a
800-53A :: AC-17.1 (i)

Group Title

PP-MDF-993300

Group ID

V-259782

Rule Version

AIOS-17-711200

Rule Title

iPhone and iPad must have the latest available iOS/iPadOS operating system installed.

Rule ID

SV-259782r943671_rule

Rule Severity

● High

Rule Weight

10.0

Vuln Discussion

Required security features are not available in earlier OS versions. In addition, earlier versions may have known vulnerabilities.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable

False

Check Content

Review configuration settings to confirm the most recently released version of iOS is installed.

This validation procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad. Go to https://www.apple.com and determine the most current version of iOS released by Apple.

In the MDM management console, review the version of iOS installed on a sample of managed devices. This procedure will vary depending on the MDM product.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "About" and view the installed version of iOS.

4. Go back to the "General" screen. Tap "Software Update" and verify the following message is shown on the screen: "Your software is up to date."

If the installed version of iOS on any reviewed iOS/iPadOS devices is not the latest released by Apple, this is a finding.

Check System

C-63518r943669_chk

Fix Reference

F-63425r943670_fix

Fix Text

Install the latest release version of Apple iOS/iPadOS on all managed iOS devices.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

CCI-000381

Configure the system to provide only organization-defined mission essential capabilities.

800-53 :: CM-7
800-53 Rev. 4 :: CM-7 a
800-53 Rev. 5 :: CM-7 a
800-53A :: CM-7.1 (ii)

Group Title

PP-MDF-993300

Group ID

V-259783

Rule Version

AIOS-17-711300

Rule Title

Apple iOS/iPadOS 17 must implement the management setting: use SSL for Exchange ActiveSync.

Rule ID

SV-259783r943674_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

Exchange email messages are a form of data in transit and thus are vulnerable to eavesdropping and man-in-the-middle attacks. Secure Sockets Layer (SSL), also referred to as Transport Layer Security (TLS), provides encryption and authentication services that mitigate the risk of breach.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable

False

Check Content

Review configuration settings to confirm "Use SSL" for the Exchange account is enabled for incoming mail.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Use SSL for incoming mail" is checked under the Exchange payload.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the Exchange policy.

5. Tap "Mail".

6. Tap the name of the Exchange account.

7. Verify "SSL for incoming mail" is set to "Yes".

If "Use SSL for incoming mail" is unchecked in the Apple iOS/iPadOS management tool or the Exchange policy on the iPhone and iPad has "SSL for incoming mail" set to "No", this is a finding.

Check System

C-63519r943672_chk

Fix Reference

F-63426r943673_fix

Fix Text

Install a configuration profile to use SSL for Exchange ActiveSync incoming mail.

Identities

CCI-000764

Uniquely identify and authenticate organizational users and associate that unique identification with processes acting on behalf of those users.

800-53 :: IA-2
800-53 Rev. 4 :: IA-2
800-53 Rev. 5 :: IA-2
800-53A :: IA-2.1

Group Title

PP-MDF-993300

Group ID

V-259784

Rule Version

AIOS-17-711400

Rule Title

Apple iOS/iPadOS 17 must implement the management setting: not allow messages in an ActiveSync Exchange account to be forwarded or moved to other accounts in the Apple iOS/iPadOS 17 Mail app.

Rule ID

SV-259784r943677_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

The Apple iOS/iPadOS Mail app can be configured to support multiple email accounts concurrently. These email accounts are likely to involve content of varying degrees of sensitivity (e.g., both personal and enterprise messages). To prevent the unauthorized and undetected forwarding or moving of messages from one account to another, Mail ActiveSync Exchange accounts can be configured to block such behavior. While users may still send a message from the Exchange account to another account, these transactions must involve an Exchange server, enabling audit records of the transaction, filtering of mail content, and subsequent forensic analysis.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable

False

Check Content

Review configuration settings to confirm "Allow messages to be moved" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Allow messages to be moved" is unchecked under the Exchange payload.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the Exchange policy.

5. Tap "Mail".

6. Tap the "name of the Exchange account".

7. Verify "Prevent Move" is set to "Yes".

If "Allow messages to be moved" is checked in the Apple iOS/iPadOS management tool or the Exchange policy on the iPhone and iPad has "Prevent Move" set to "No", this is a finding.

Check System

C-63520r943675_chk

Fix Reference

F-63427r943676_fix

Fix Text

Install a configuration profile to prevent Exchange messages from being moved or forwarded between email accounts.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

CCI-000764

Uniquely identify and authenticate organizational users and associate that unique identification with processes acting on behalf of those users.

800-53 :: IA-2
800-53 Rev. 4 :: IA-2
800-53 Rev. 5 :: IA-2
800-53A :: IA-2.1

Group Title

PP-MDF-993300

Group ID

V-259785

Rule Version

AIOS-17-711500

Rule Title

Apple iOS/iPadOS 17 must implement the management setting: Treat AirDrop as an unmanaged destination.

Rule ID

SV-259785r943680_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

AirDrop is a way to send contact information or photos to other users with AirDrop enabled. This feature enables a possible attack vector for adversaries to exploit. Once the attacker has gained access to the information broadcast by this feature, the attacker may distribute this sensitive information very quickly and without DOD's control or awareness. By disabling this feature, the risk of mass data exfiltration will be mitigated.

Note: If the site uses Apple's optional Automatic Device Enrollment, this control is available as a supervised MDM control.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable

False

Check Content

Review configuration settings to confirm "Treat AirDrop as an unmanaged destination" is enabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Treat AirDrop as unmanaged destination" is checked.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Sharing managed documents using AirDrop not allowed" is listed.

If "Treat AirDrop as unmanaged destination" is disabled in the Apple iOS/iPadOS management tool or the restrictions policy on the iPhone and iPad does not list "Sharing managed documents using AirDrop not allowed", this is a finding.

Check System

C-63521r943678_chk

Fix Reference

F-63428r943679_fix

Fix Text

Install a configuration profile to treat AirDrop as an unmanaged destination.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

CCI-002008

For PKI-based authentication, employs an organization-wide methodology for managing the content of PKI trust stores installed across all platforms including networks, operating systems, browsers, and applications.

800-53 Rev. 4 :: IA-5 (14)
800-53 Rev. 5 :: IA-5 (14)

Group Title

PP-MDF-993300

Group ID

V-259786

Rule Version

AIOS-17-711800

Rule Title

Apple iOS/iPadOS 17 must implement the management setting: force Apple Watch wrist detection.

Rule ID

SV-259786r943683_rule

Rule Severity

● Low

Rule Weight

10.0

Vuln Discussion

Because Apple Watch is a personal device, it is key that any sensitive DOD data displayed on the Apple Watch cannot be viewed when the watch is not in the immediate possession of the user. This control ensures the Apple Watch screen locks when the user takes the watch off, thereby protecting sensitive DOD data from possible exposure.

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable

False

Check Content

Review configuration settings to confirm "Force Apple Watch wrist detection" is enabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the Apple iOS/iPadOS management tool, verify "Wrist detection enforced on Apple Watch" is enforced.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the Apple iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Wrist detection enforced on Apple Watch" is listed.

If "Wrist detection enforced on Apple Watch" is not enforced in the Apple iOS/iPadOS management tool or the restrictions policy on the iPhone and iPad does not list "Wrist detection enforced on Apple Watch", this is a finding.

Check System

C-63522r943681_chk

Fix Reference

F-63429r943682_fix

Fix Text

Install a configuration profile to force Apple Watch wrist detection.

Identities

CCI-000381

Configure the system to provide only organization-defined mission essential capabilities.

800-53 :: CM-7
800-53 Rev. 4 :: CM-7 a
800-53 Rev. 5 :: CM-7 a
800-53A :: CM-7.1 (ii)

Group Title

PP-MDF-993300

Group ID

V-259787

Rule Version

AIOS-17-711900

Rule Title

Apple iOS/iPadOS 17 users must complete required training.

Rule ID

SV-259787r943686_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

The security posture on iOS devices requires the device user to configure several required policy rules on their device. User-Based Enforcement (UBE) is required for these controls. In addition, if the authorizing official (AO) has approved users' full access to the Apple App Store, users must receive training on risks. If a user is not aware of their responsibilities and does not comply with UBE requirements, the security posture of the iOS mobile device and DOD sensitive data may become compromised.

SFR ID: NA

Documentable

False

Check Content

Review a sample of site User Agreements for iOS device users or similar training records and training course content. Verify iPhone and iPad users have completed required training.

If any iPhone/iPad user has not completed required training, this is a finding.

Check System

C-63523r943684_chk

Fix Reference

F-63430r943685_fix

Fix Text

Have all iPhone and iPad users complete training on the following topics. Users must acknowledge receipt of training via a signed User Agreement or similar written record.

Training topics:

- How to ensure "USB Restricted Mode" is disabled on Apple device.

- Operational security concerns introduced by unmanaged applications, including applications using global positioning system (GPS) tracking.

- Must ensure no DOD data is saved in an unmanaged app or transmitted from a personal app (for example, from personal email).

- If the Purebred key management app is used, users are responsible for maintaining positive control of their credentialed device at all times. The DOD PKI certificate policy requires subscribers to maintain positive control of the devices that contain private keys and report any loss of control so the credentials can be revoked. Upon device retirement, turn in, or reassignment, ensure a factory data reset is performed prior to device handoff. Follow mobility service provider decommissioning procedures as applicable.

- Screenshots will not be taken of any work-related managed data.

For User Enrollment sites:

- How to configure inactivity timeout.

- How to configure force device erase after 10 incorrect password attempts.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

CCI-000381

Configure the system to provide only organization-defined mission essential capabilities.

800-53 :: CM-7
800-53 Rev. 4 :: CM-7 a
800-53 Rev. 5 :: CM-7 a
800-53A :: CM-7.1 (ii)

Group Title

PP-MDF-993300

Group ID

V-259788

Rule Version

AIOS-17-712000

Rule Title

A managed photo app must be used to take and store work-related photos.

Rule ID

SV-259788r943689_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

The iOS Photos app is unmanaged and may sync photos with a device user's personal iCloud account. Therefore, work-related photos must not be taken via the iOS camera app or stored in the Photos app. A managed photo app must be used to take and manage work-related photos.

SFR ID: NA

Documentable

False

Check Content

Review configuration settings to confirm a managed photos app is installed on the iOS device.

This check procedure is performed on the iPhone and iPad.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the DOD Configuration Profile from the Apple iOS/iPadOS management tool.

5. Tap "Apps".

6. Verify a photo capture and management app is listed.

If a managed photo capture and management app is not installed on the iPhone and iPad, this is a finding.

Check System

C-63524r943687_chk

Fix Reference

F-63431r943688_fix

Fix Text

Install a managed photos app to take and manage work-related photos.

Identities

CCI-000097

Restrict the use of organization-controlled portable storage devices by authorized individuals on external systems using organization-defined restrictions.

800-53 :: AC-20 (2)
800-53 Rev. 4 :: AC-20 (2)
800-53 Rev. 5 :: AC-20 (2)
800-53A :: AC-20 (2).1

Group Title

PP-MDF-993300

Group ID

V-259789

Rule Version

AIOS-17-712300

Rule Title

Apple iOS/iPadOS 17 must not allow managed apps to write contacts to unmanaged contacts accounts.

Rule ID

SV-259789r943692_rule

Rule Severity

● Low

Rule Weight

10.0

Vuln Discussion

Managed apps have been approved for the handling of DOD sensitive information. Unmanaged apps are provided for productivity and morale purposes but are not approved to handle DOD sensitive information. Examples of unmanaged apps include those for news services, travel guides, maps, and social networking. If a document were to be viewed in a managed app and the user had the ability to open this same document in an unmanaged app, this could lead to the compromise of sensitive DOD data. In some cases, the unmanaged apps are connected to cloud backup or social networks that would permit dissemination of DOD sensitive information to unauthorized individuals. Not allowing data to be opened within unmanaged apps mitigates the risk of compromising sensitive data.

SFR ID: FMT_SMF_EXT.1.1 #42, FDP_ACF_EXT.1.2

Documentable

False

Check Content

Review configuration settings to confirm "Allow managed apps to write contacts to unmanaged contacts accounts" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the Apple iOS/iPadOS device.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the iOS/iPadOS management tool, verify "Allow managed apps to write contacts to unmanaged contacts accounts" is unchecked.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Allow managed apps to write contacts to unmanaged contacts accounts" is not listed.

If "Allow managed apps to write contacts to unmanaged contacts accounts" is checked in the iOS/iPadOS management tool or the restrictions policy on the iPhone and iPad lists "Allow managed apps to write contacts to unmanaged contacts accounts", this is a finding.

Check System

C-63525r943690_chk

Fix Reference

F-63432r943691_fix

Fix Text

Install a configuration profile to prevent managed apps from writing contacts to unmanaged contacts accounts.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

Group Title

PP-MDF-993300

Group ID

V-259790

Rule Version

AIOS-17-712400

Rule Title

Apple iOS/iPadOS 17 must not allow unmanaged apps to read contacts from managed contacts accounts.

Rule ID

SV-259790r943695_rule

Rule Severity

● Low

Rule Weight

10.0

Vuln Discussion

SFR ID: FMT_SMF_EXT.1.1 #42, FDP_ACF_EXT.1.2

Documentable

False

Check Content

Review configuration settings to confirm "Allow unmanaged apps to read contacts from managed contacts accounts" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the iOS management tool, verify "Allow unmanaged apps to read contacts from managed contacts accounts" is unchecked.

On the iPhone and iPad:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS/iPadOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Allow unmanaged apps to read contacts from managed contacts accounts" is not listed.

If "Allow unmanaged apps to read contacts from managed contacts accounts" is checked in the iOS/iPadOS management tool or the restrictions policy on the iPhone and iPad lists "Allow unmanaged apps to read contacts from managed contacts accounts", this is a finding.

Check System

C-63526r943693_chk

Fix Reference

F-63433r943694_fix

Fix Text

Install a configuration profile to prevent unmanaged apps from reading contacts from managed contacts accounts.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

Group Title

PP-MDF-993300

Group ID

V-259791

Rule Version

AIOS-17-713400

Rule Title

The Apple iOS must be configured to disable automatic transfer of diagnostic data to an external device other than an MDM service with which the device has enrolled.

Rule ID

SV-259791r943698_rule

Rule Severity

● Low

Rule Weight

10.0

Vuln Discussion

Many software systems automatically send diagnostic data to the manufacturer or a third party. This data enables the developers to understand real-world field behavior and improve the product based on that information. Unfortunately, it can also reveal information about what DOD users are doing with the systems and what causes them to fail. An adversary embedded within the software development team or elsewhere could use the information acquired to breach mobile operating system security. Disabling automatic transfer of such information mitigates this risk.

SFR ID: FMT_SMF_EXT.1.1 #47a

Documentable

False

Check Content

Review configuration settings to confirm "Allow sending diagnostic and usage data to Apple" is disabled.

This check procedure is performed on both the iOS management tool and the iOS device.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the iOS management tool, verify "Allow sending diagnostic and usage data to Apple" is unchecked.

Alternatively, verify the text "<key>allowDiagnosticSubmission</key><false/>" appears in the configuration profile (.mobileconfig file).

On the Apple iOS device:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the management policy.

5. Tap "Restrictions".

6. Verify "Diagnostic submission not allowed".

Note: This setting also disables "Share With App Developers".

If "Allow sending diagnostic and usage data to Apple" is checked in the iOS management tool, "<key>allowDiagnosticSubmission</key><true/>" appears in the configuration profile, or the restrictions policy on the Apple iOS device from the Apple iOS management tool does not list "Diagnostic submission not allowed", this is a finding.

Check System

C-63527r943696_chk

Fix Reference

F-63434r943697_fix

Fix Text

Install a configuration profile to disable sending diagnostic data to an organization other than DOD.

Identities

CCI-001199

Protects the confidentiality and/or integrity of organization-defined information at rest.

800-53 :: SC-28
800-53 Rev. 4 :: SC-28
800-53 Rev. 5 :: SC-28
800-53A :: SC-28.1

Group Title

PP-MDF-993300

Group ID

V-259792

Rule Version

AIOS-17-714600

Rule Title

Apple iOS/iPadOS 17 must disable copy/paste of data from managed to unmanaged applications.

Rule ID

SV-259792r943701_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

SFR ID: FMT_SMF_EXT.1.1 #47

Documentable

False

Check Content

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the iOS management tool, verify "Require managed pasteboard" is set to "True".

If "Require managed pasteboard" is not set to "True", this is a finding.

Check System

C-63528r943699_chk

Fix Reference

F-63435r943700_fix

Fix Text

Configure the Apple iOS configuration profile to disable copy/paste of data from managed to unmanaged applications.

The procedure for implementing this control will vary depending on the MDM/EMM used by the mobile service provider.

In the MDM console, set "Require managed pasteboard" to "True".

Identities

CCI-000097

Restrict the use of organization-controlled portable storage devices by authorized individuals on external systems using organization-defined restrictions.

800-53 :: AC-20 (2)
800-53 Rev. 4 :: AC-20 (2)
800-53 Rev. 5 :: AC-20 (2)
800-53A :: AC-20 (2).1

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

Group Title

PP-MDF-333350

Group ID

V-259793

Rule Version

AIOS-17-714700

Rule Title

Apple iOS/iPadOS 17 must have DOD root and intermediate PKI certificates installed.

Rule ID

SV-259793r943704_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

DOD root and intermediate PKI certificates are used to verify the authenticity of PKI certificates of users and web services. If the user is allowed to remove root and intermediate certificates, the user could allow an adversary to falsely sign a certificate in such a way that it could not be detected. Restricting the ability to remove DOD root and intermediate PKI certificates to the administrator mitigates this risk.

SFR ID: FMT_MOF_EXT.1.2 #47

Documentable

False

Check Content

Verify DOD intermediate and root certificates have been installed on Apple devices.

In the iOS management tool, verify the DOD intermediate and root certificates are installed on the Apple device.

On the iPhone and iPad device:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Tap "More Details".

7. Verify the DOD intermediate and root certificates are listed.

If DOD intermediate and root certificates are not installed on the Apple device, this is a finding.

Check System

C-63529r943702_chk

Fix Reference

F-63436r943703_fix

Fix Text

Install DOD intermediate and root certificates on managed mobile devices using the MDM.

Identities

CCI-000366

Implement the security configuration settings.

800-53 :: CM-6 b
800-53 Rev. 4 :: CM-6 b
800-53 Rev. 5 :: CM-6 b
800-53A :: CM-6.1 (iv)

Group Title

PP-MDF-993300

Group ID

V-259794

Rule Version

AIOS-17-714900

Rule Title

Apple iOS/iPadOS 17 must not allow DOD applications to access non-DOD data.

Rule ID

SV-259794r943707_rule

Rule Severity

● Medium

Rule Weight

10.0

Vuln Discussion

SFR ID: FMT_SMF_EXT.1.1 #42, FDP_ACF_EXT.1.2

Documentable

False

Check Content

Review configuration settings to confirm "Allow documents from unmanaged apps in managed apps" is disabled.

This check procedure is performed on both the Apple iOS/iPadOS management tool and the iPhone and iPad.

Note: If an organization has multiple configuration profiles, the check procedure must be performed on the relevant configuration profiles applicable to the scope of the review.

In the iOS management tool, verify "Allow documents from unmanaged apps in managed apps" is unchecked.

On the iOS device:

1. Open the Settings app.

2. Tap "General".

3. Tap "VPN & Device Management".

4. Tap the Configuration Profile from the iOS management tool containing the restrictions policy.

5. Tap "Restrictions".

6. Verify "Opening documents from unmanaged to managed apps not allowed" is listed.

If "Allow documents from unmanaged apps in managed apps" is checked in the iOS management tool or the restrictions policy on the iPhone and iPad does not list "Opening documents from unmanaged to managed apps not allowed", this is a finding.

Check System

C-63530r943705_chk

Fix Reference

F-63437r943706_fix

Fix Text

Install a configuration profile to prevent DOD applications from accessing non-DOD data.

Identities

CCI-002233

Prevent the organization-defined software from executing at higher privilege levels than users executing the software.

800-53 Rev. 4 :: AC-6 (8)
800-53 Rev. 5 :: AC-6 (8)

CCI-002530

Maintain a separate execution domain for each executing system process.

800-53 Rev. 4 :: SC-39
800-53 Rev. 5 :: SC-39

UNCLASSIFIED